From the Home of Tone bench
The 10 year anniversary build project - Part Two
Welcome to part two of the 10 year anniversary build article. Along with the finishing work Rob at RF Custom has done, he also very kindly accepted my request to make the neck for this one too. If you're not already aware, Rob undertakes machining for a few fantastic, highly respected guitar makers, so is well equipped for this process. There were a few unique features to the neck, and knowing the level of his work, along with the premium woods planned, I felt it was the right decision to ask for Rob's help with it....
Spence's SPARKLEMASTER build project
Building a custom hardtail Strat body
A tidy up for this very cool Epiphone Les Paul Custom Pro
Left handed Custom Shop '59 Relic Strat for a re-wire
Gibson Les Paul Standard - Full Set-up
On initial inspection, everything was quite good indeed overall. I did notice on closer inspection a couple of high frets, and that the fret leveling radius was a little out from it's optimal 12" radius. So I corrected those first of all, and a re-crown polish saw me move onto the setup adjustments. Nice relief at .008", and a low action at around 1.6mm at the 15th for the basses and around 1.2mm for the trebles at the 15th. Intonation quickly settling via the Stringjoys which are proving to be a very consistent product for accurate setups here. String slots at the nut slightly adjusted and depths set from .008" through to .004" from basses to the trebles. Lovely guitar and a pleasure to work on it!






