Seymour Duncan Pickups - JB Model™ Bridge SH-4 Humbucker
Please use the tabs below to read through the information about this product.
About Seymour Duncan
Seymour Duncan have long cemented themselves as the leading aftermarket pickup brand in the world, offering a staggering selection of models, and doing so affordably too. Throughout their range they have created iconic models that stand the test of time, popular for a variety of guitars and music styles.
About the JB Model
I couldn't possibly count how many guitars I have had pass through my hands with a JB model pickup fitted to it. Either already equipped, or had to install to, a hugely popular high output humbucker.
What SD say:
"The JB Model humbucker is our most popular pickup of all time. Blues, country, fusion, punk, hard rock, grunge, thrash; the JB has always sounded just right, even as new genres emerged around it. The low end is full and powerful, the highs are crisp and detailed and there’s an upper-midrange bump that adds crunch and chunk to heavy chords but translates to a singing, vocal-like quality when you play single notes or solos. Meanwhile the hot output pushes your amp just that little bit harder for more sustain and harmonics.
Use it with a 500k volume pot for great high-end cut, or try a 250k pot to sweeten and soften the tone for smoother styles. It pairs particularly well with the Jazz or ’59 neck pickups, and some players even like to use a JB in the neck position for an extra-fat solo tone.
Hand built in our Santa Barbara, CA factory, the JB Model uses an Alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options like series, parallel and split coil, and is vacuum wax potted for squeal-free performance. Available in standard humbucker and Trembucker spacing for 6-String, as well as passive mount 7-String options.."
Nerdy specs
Magnet - Alnico 5
Type - Passive
Wire type - 4 conductor shielded
DCR bridge - 16.6k
Short leg mounting
Dimensions - Click here for sizing spec sheet
Recommended wiring - The JB model humbucker is generally seen paired with 500k pots, and 0.047uF (SD's recommendation) or 0.022uF tone capacitor values depending on personal preference or application.
What's included?
Inside the box you'll find the neck and bridge pickups, along with your mounting screws and springs for each, and a wiring guide which covers traditional as well as alternative wiring styles.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional uncovered, short leg humbucker pickup. They are 4 conductor wired as standard which means you could wire it with some alternative switching options comfortably such as coil split, phase reversal or series/parallel, making them very versatile. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Seymour Duncan pickups from the Home of Tone?
The Home of Tone are an authorised main dealer for Seymour Duncan. What that means is stock is carried here on site for prompt service and dispatch as well as assurance you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Seymour Duncan pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE
Please use the tabs below to read through the information about this product.
About Seymour Duncan
Seymour Duncan have long cemented themselves as the leading aftermarket pickup brand in the world, offering a staggering selection of models, and doing so affordably too. Throughout their range they have created iconic models that stand the test of time, popular for a variety of guitars and music styles.
About the JB Model
I couldn't possibly count how many guitars I have had pass through my hands with a JB model pickup fitted to it. Either already equipped, or had to install to, a hugely popular high output humbucker.
What SD say:
"The JB Model humbucker is our most popular pickup of all time. Blues, country, fusion, punk, hard rock, grunge, thrash; the JB has always sounded just right, even as new genres emerged around it. The low end is full and powerful, the highs are crisp and detailed and there’s an upper-midrange bump that adds crunch and chunk to heavy chords but translates to a singing, vocal-like quality when you play single notes or solos. Meanwhile the hot output pushes your amp just that little bit harder for more sustain and harmonics.
Use it with a 500k volume pot for great high-end cut, or try a 250k pot to sweeten and soften the tone for smoother styles. It pairs particularly well with the Jazz or ’59 neck pickups, and some players even like to use a JB in the neck position for an extra-fat solo tone.
Hand built in our Santa Barbara, CA factory, the JB Model uses an Alnico 5 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options like series, parallel and split coil, and is vacuum wax potted for squeal-free performance. Available in standard humbucker and Trembucker spacing for 6-String, as well as passive mount 7-String options.."
Nerdy specs
Magnet - Alnico 5
Type - Passive
Wire type - 4 conductor shielded
DCR bridge - 16.6k
Short leg mounting
Dimensions - Click here for sizing spec sheet
Recommended wiring - The JB model humbucker is generally seen paired with 500k pots, and 0.047uF (SD's recommendation) or 0.022uF tone capacitor values depending on personal preference or application.
What's included?
Inside the box you'll find the neck and bridge pickups, along with your mounting screws and springs for each, and a wiring guide which covers traditional as well as alternative wiring styles.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional uncovered, short leg humbucker pickup. They are 4 conductor wired as standard which means you could wire it with some alternative switching options comfortably such as coil split, phase reversal or series/parallel, making them very versatile. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Seymour Duncan pickups from the Home of Tone?
The Home of Tone are an authorised main dealer for Seymour Duncan. What that means is stock is carried here on site for prompt service and dispatch as well as assurance you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Seymour Duncan pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE