McNelly - Soap Bar Bliss
Please use the tabs below to read through the information about this product.
Ordering/made to order lead time
This particular McNelly pickup model is hand made to order in Canada. McNelly are currently working to a roughly 6-8 week wait time on made to order pickups. By placing an order through the website, I will handle this made to order process from there on out. I handle the order, importing from Canada for you and once they're here, I inspect and ship them out to you.
About the 'Bliss'
A low output set with the stunning complexity and the warmth of Alnico 2. If you're looking for the sweetness of the Autumns, but want to have a little more presence, this is your set - adapted here from regular HB, to P90 size for soapbar equipped guitars.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 conductor braided
DCR neck - 7k
DCR bridge - 8k
1-15/16" string spacing
Recommended wiring - The Bliss soapbar sized humbucker is generally seen paired with 500k pots, and 0.022uF.
Will it fit my guitar?
This specific variant of Bliss humbucker pickup is traditional Soapbar P90 sizing (roughly 85.6mm x 35.1mm cover for example) and you can choose whether to have them as body mount, or pickguard mount. Body mount is the traditional way soapbar P90s are mounted, with wood screws going through the pickup cover and into the guitars pickup cavity with either foam or springs underneath for height adjustment.
If you need the pickup to suspect from a pickguard, you will need to select pickguard mount. The pickup will be made with small tabs either side of the cover, allowing suspended mounting to a pickguard/ring via screws and springs.
If you are at all unsure which spec you need, please get in touch with me with some info on your guitar, photos etc and I will help guide you in which you'll need for that guitar to ensure correct fitment - james@homeoftone.co.uk
Cover Options
McNelly pickups are listed individually, so simply add the neck and/or bridge pickup in the cover option you wish, to the cart.
The Soap Bar Bliss range is available in a lovely selection of cover options, please see the drop down menu and photos for a run down.
What's included?
Inside the box you'll find the pickup(s) you have ordered, along with your mounting screws and springs for each.
Installation
These pickups are a traditional sized soapbar P90, albeit a humbucker in coil design. They are traditional 2 conductor wired as standard (Gavitt braided style wire where outer braiding is ground, central cloth covered wire is 'hot'). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Hear the Bliss
Please use the tabs below to read through the information about this product.
Ordering/made to order lead time
This particular McNelly pickup model is hand made to order in Canada. McNelly are currently working to a roughly 6-8 week wait time on made to order pickups. By placing an order through the website, I will handle this made to order process from there on out. I handle the order, importing from Canada for you and once they're here, I inspect and ship them out to you.
About the 'Bliss'
A low output set with the stunning complexity and the warmth of Alnico 2. If you're looking for the sweetness of the Autumns, but want to have a little more presence, this is your set - adapted here from regular HB, to P90 size for soapbar equipped guitars.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 conductor braided
DCR neck - 7k
DCR bridge - 8k
1-15/16" string spacing
Recommended wiring - The Bliss soapbar sized humbucker is generally seen paired with 500k pots, and 0.022uF.
Will it fit my guitar?
This specific variant of Bliss humbucker pickup is traditional Soapbar P90 sizing (roughly 85.6mm x 35.1mm cover for example) and you can choose whether to have them as body mount, or pickguard mount. Body mount is the traditional way soapbar P90s are mounted, with wood screws going through the pickup cover and into the guitars pickup cavity with either foam or springs underneath for height adjustment.
If you need the pickup to suspect from a pickguard, you will need to select pickguard mount. The pickup will be made with small tabs either side of the cover, allowing suspended mounting to a pickguard/ring via screws and springs.
If you are at all unsure which spec you need, please get in touch with me with some info on your guitar, photos etc and I will help guide you in which you'll need for that guitar to ensure correct fitment - james@homeoftone.co.uk
Cover Options
McNelly pickups are listed individually, so simply add the neck and/or bridge pickup in the cover option you wish, to the cart.
The Soap Bar Bliss range is available in a lovely selection of cover options, please see the drop down menu and photos for a run down.
What's included?
Inside the box you'll find the pickup(s) you have ordered, along with your mounting screws and springs for each.
Installation
These pickups are a traditional sized soapbar P90, albeit a humbucker in coil design. They are traditional 2 conductor wired as standard (Gavitt braided style wire where outer braiding is ground, central cloth covered wire is 'hot'). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.