McNelly A2 Signature Plus Bridge Pickup
Please use the tabs below to read through the information about this product.
Availability
This specific A2 Signature Plus bridge pickup is in stock and ready for dispatch.
About the A2 Signature plus bridge pickup
Think of the A2 Signature Plus bridge as a vintage example with some degaussing of the magnets. It's clear and balanced with softer attack and high end. It's been designed to retain the touch sensitivity of the A2 Signature, but will push into drive quicker.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 wire
Copper baseplate installed
DCR bridge - 7.1k
Magnet direction - North up
Coil direction - Clockwise
Recommended wiring - The A2 Signature Plus bridge pickup is generally seen paired with 250k pots, and a 0.022uF capacitor, but you could also pair it with a 0.047uF if you prefer a slightly warmer vintage tone and steeper roll off.
Will it fit my guitar?
This specific A2 Signature Plus pickup is traditional Telecaster bridge pickup size and mount. It is intended for traditional suspended mounting via the Tele bridge plate and has a threaded baseplate.
Installation
This pickup is traditional 2 wire as standard (Gavitt cloth 22awg wire, usually off-white for hot and black for ground). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Hear the A2 Signature
Here's a A2 Plus fitted into a Brown Bear Guitars thinline tele, also shown paired with a Stagger Swagger which works well indeed!
And here's an A2 Signature Plus bridge pickup paired with a Wild Range neck humbucker.
Please use the tabs below to read through the information about this product.
Availability
This specific A2 Signature Plus bridge pickup is in stock and ready for dispatch.
About the A2 Signature plus bridge pickup
Think of the A2 Signature Plus bridge as a vintage example with some degaussing of the magnets. It's clear and balanced with softer attack and high end. It's been designed to retain the touch sensitivity of the A2 Signature, but will push into drive quicker.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 wire
Copper baseplate installed
DCR bridge - 7.1k
Magnet direction - North up
Coil direction - Clockwise
Recommended wiring - The A2 Signature Plus bridge pickup is generally seen paired with 250k pots, and a 0.022uF capacitor, but you could also pair it with a 0.047uF if you prefer a slightly warmer vintage tone and steeper roll off.
Will it fit my guitar?
This specific A2 Signature Plus pickup is traditional Telecaster bridge pickup size and mount. It is intended for traditional suspended mounting via the Tele bridge plate and has a threaded baseplate.
Installation
This pickup is traditional 2 wire as standard (Gavitt cloth 22awg wire, usually off-white for hot and black for ground). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Hear the A2 Signature
Here's a A2 Plus fitted into a Brown Bear Guitars thinline tele, also shown paired with a Stagger Swagger which works well indeed!
And here's an A2 Signature Plus bridge pickup paired with a Wild Range neck humbucker.