McNelly A2 Signature Neck Pickup w/nickel cover
Please use the tabs below to read through the information about this product.
Availability
This specific A2 Signature neck pickup w/nickel cover is in stock and ready for dispatch.
About the A2 Signature neck pickup
This model has a bit of the squish you get from a vintage modelled Tele neck pickup, but also a surprising amount of definition. It's sweet without a hint of muddiness. A beautiful sounding neck position Tele single coil, the right amount of sweetness to the top end, and jazzy warmth with the tone rolled back. Great clean tones from this one for those that love the more vintage dynamic.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 wire
DCR bridge - 5.3k
Magnet direction - South up
Coil direction - Counter-Clockwise
Recommended wiring - The A2 Signature pickup is generally seen paired with 250k pots, and a 0.022uF capacitor, but you could also pair it with a 0.047uF if you prefer a slightly warmer, vintage tone and steeper roll off.
Will it fit my guitar?
This specific A2 Signature is traditional Telecaster bridge pickup size and mount. It can be mounted to a pickguard, or direct into the body within the pickup route, depending on your exact guitars requirements.
Installation
This pickup is traditional 2 wire as standard (Gavitt cloth 22awg wire, usually off-white for hot and black for ground). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too
Hear It
Here's a video by Sean Pierce Johnson on YouTube, featuring a Jennings Navigator guitar. This specific guitar has the A2 Signature neck pickup, and shows it on it's own, with a compressor and a booster so it is a good representation of the pickup's response.
Please use the tabs below to read through the information about this product.
Availability
This specific A2 Signature neck pickup w/nickel cover is in stock and ready for dispatch.
About the A2 Signature neck pickup
This model has a bit of the squish you get from a vintage modelled Tele neck pickup, but also a surprising amount of definition. It's sweet without a hint of muddiness. A beautiful sounding neck position Tele single coil, the right amount of sweetness to the top end, and jazzy warmth with the tone rolled back. Great clean tones from this one for those that love the more vintage dynamic.
Nerdy specs
Magnet - Alnico 2
Type - Passive
Wire type - 2 wire
DCR bridge - 5.3k
Magnet direction - South up
Coil direction - Counter-Clockwise
Recommended wiring - The A2 Signature pickup is generally seen paired with 250k pots, and a 0.022uF capacitor, but you could also pair it with a 0.047uF if you prefer a slightly warmer, vintage tone and steeper roll off.
Will it fit my guitar?
This specific A2 Signature is traditional Telecaster bridge pickup size and mount. It can be mounted to a pickguard, or direct into the body within the pickup route, depending on your exact guitars requirements.
Installation
This pickup is traditional 2 wire as standard (Gavitt cloth 22awg wire, usually off-white for hot and black for ground). If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too
Hear It
Here's a video by Sean Pierce Johnson on YouTube, featuring a Jennings Navigator guitar. This specific guitar has the A2 Signature neck pickup, and shows it on it's own, with a compressor and a booster so it is a good representation of the pickup's response.