Pre-Wired Guitar wiring harness | SG kit | Right Handed & Left Handed


Delivery time
I usually make harnesses to order, due to the variety of spec options that could be chosen across the range. The waiting time for harness orders is around 3-5 working days depending on quantity of orders in at the time and your order will be updated accordingly when dispatched.

SGs must have looked like such a unique design upon their launch, the thin body, pointed horns and incredible upper fret access. A big jump from the original Les Paul for which it was originally introduced as a replacement for. I've spent a lot of time refining the specs of this harness to ensure the best from the guitar and an easy install. After offering a variety of specs over the years, I've now settled on 50s style wiring as standard, with high quality components and a few spec choices which I hope to help the install process that little bit easier. 

I have intended for my wiring harnesses to be as simple as possible to install to your SG, as well as writing in depth fitting guides, how-to instructions documenting the step by step process as well as a simple to follow wiring diagram.
The parts I use, in particular the pots, are US made CTS branded pots which are imperial measurements. If you're fitting this harness to a far east built variant for example such as a Epiphone or similar, then you may have to widen the holes in the body to accommodate for these imperial measurement pots. 
For reference, the CTS pots I use in this harness have a shaft diameter of 9.5mm.
You may also require new control knobs to fit the CTS pot 'split shaft' spline diameter of 5.95mm.
If you do require US spec control knobs, we do carry a selection of popular options in stock and they can be viewed in the hardware & plastic hardware categories on the store.

The mounting board I ship my harnesses out on, were taken from measurements of a USA build Gibson SG. The centre to centre measurements between components are - 
Centre to centre measurements between components are - 
Centre of Switch to neck volume pot - 55mm
Centre of switch to bridge volume pot - 55mm
Centre of neck volume pot to centre of neck tone pot - 50mm
Centre of bridge volume pot to centre of bridge tone pot - 50mm
Centre of neck volume pot to bridge volume pot - 44mm
Centre of neck tone pot to bridge tone pot - 44mm
Centre of neck tone pot to centre of jack socket - 34mm

Specs and options

- CTS 'TVT' Series +/-10% Tolerance long shaft pots - 500k, split shaft pots as standard on SG kits.
- For LH Taper kits - CTS Left Handed Audio taper 500k split shaft pots. 
- SoZo .022uF Mustard tone capacitors  (If you'd prefer a different value capacitor, do please get in touch and I'd be happy to help, but as standard all of my kits come with .022uF value)
- Switchcraft right angle 3 way toggle switch
- Knurled nut for 3 way toggle switch
- Pure tone multi contact jack socket (with longer thread)
- Gavitt Braided 22AWG wire

With or without Treble Bleed?
First up, what does it do? A Treble Bleed kit takes the 'high' treble tone frequencies out of the circuit at the volume pot, and puts them back in the circuit as the signal leaves the volume pot. This means the treble frequencies are prevented from naturally bleeding out of the circuit as your turn your volume pot down. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. Some guitar players wouldn't be without a treble bleed, and many have never used one on their guitars. Truth is, it is very much personal preference. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you!
To note, treble bleeds aren't really needed for fifties style wiring due to the way fifties wiring works. You can have them on if you like and I have included it as a drop down option as some customers still request them, but just a heads up!

Righty or Southpaw, the choice is there to suit however your play!
Alongside the usual right handed replacement wiring harnesses, I also make these in left handed orientation. After a lot of research and customer orders over the years it seems 99.9% of Lefty players are used to using guitars with traditional RH taper pots. This is mainly because many guitar manufacturers simply fitted RH taper pots in LH taper guitars. But some LH players do of course prefer using LH taper pots, whatever your preference as a Left handed Strat player, I offer the spec to suit.