Tesi Switch - Tesi MIMMO 10MM Momentary LED Push Button Guitar Kill Switch

£17.99 GBP
Tax included Shipping calculated at checkout.

Please use the tabs below to read through the information about this product.

About

I was really impressed by these kill switches after inspecting/using one, they have a couple of useful features which I'll touch on in a moment, that make them great for guitar mods. I am now a UK authorised dealer for Tesi Switch and you'll find a great selection of their kill switches here in stock at the Home of Tone!

The MIMMO 10MM Momentary LED button switch is perfect for the player that doesn't want to make a major modification to their guitar.  This is the perfect size to replace a standard CTS style 3/8" / 9.52mm mounting thread diameter potentiometer. If you have a smaller pots on an Asian import guitar, only minimal modification to the hole is required.

This button takes some cool features from the IDO 10mm spec, but with the beautiful LED ring addition. In Stainless steel, with a red LED ring, this one will look particularly cool on stage. Some worthy notes worth reading in the fitting and spec tabs below, as being LED you will need to consider power. The kit does come with what is needed to power/wire up, but well worth a read to see if this is suitable for your guitar/needs.

Specs

Type: Momentary Push Button Switch
Operation Type: Normally Open (yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)
Housing Material: Stainless Steel
Mounting hole Size: 10mm
Mounting Panel Thickness: 1mm-6mm
Mounting Depth: 35mm
Operation Pressure: about 3n-5n
Operation Stroke: 2.5mm
LED Rated Voltage:  6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring)
          *note:  This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.
LED Life: About 40,000 hours
LED Power Draw: 15mA
Contact Resistance: 50 mOhm
Mechanical Life: 500,000 cycles
Switch Rating: 3A/250VDC

Installation

These are nice and easy to install, but if you have any concerns about installing I highly recommend having a skilled guitar repairer to carry out the install for you to save any issues caused. Some useful fitting instructions can be found HERE. Or alternatively, if you are local, then I am more than happy to carry out professional installation here. Please check out the Guitar Services page HERE

This package comes with everything:

(1) Tesi MIMMO 10mm Momentary Guitar Kill Switch  
(1) Tesi Quick-Connect wiring Bundle that includes:
     (1) 8" Black ground wire (already attached)
     (1) 8" White hot wire (already attached)
     (1) 8" 9V Battery Harness with 330 Ohm resistor
     (1) On/Off Rocker Switch
(1) Set of easy-to-follow wiring instructions
(1) Spare 270 Ohm resistor for custom wiring jobs

When used with active pickups and/or a stereo output jack (not included) the Tesi MIMMO does not require the additional on/off rocker switch.

PLEASE NOTE: Do not try to connect the switch directly to a battery. The LED is a 6V bulb and requires a resistor with a minimum value of 270 Ohms to work with a 9V battery.  Using a 9V battery without the resistor voids the warranty on the switch.

Ordering/shipping

Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE

Please use the tabs below to read through the information about this product.

About

I was really impressed by these kill switches after inspecting/using one, they have a couple of useful features which I'll touch on in a moment, that make them great for guitar mods. I am now a UK authorised dealer for Tesi Switch and you'll find a great selection of their kill switches here in stock at the Home of Tone!

The MIMMO 10MM Momentary LED button switch is perfect for the player that doesn't want to make a major modification to their guitar.  This is the perfect size to replace a standard CTS style 3/8" / 9.52mm mounting thread diameter potentiometer. If you have a smaller pots on an Asian import guitar, only minimal modification to the hole is required.

This button takes some cool features from the IDO 10mm spec, but with the beautiful LED ring addition. In Stainless steel, with a red LED ring, this one will look particularly cool on stage. Some worthy notes worth reading in the fitting and spec tabs below, as being LED you will need to consider power. The kit does come with what is needed to power/wire up, but well worth a read to see if this is suitable for your guitar/needs.

Specs

Type: Momentary Push Button Switch
Operation Type: Normally Open (yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)
Housing Material: Stainless Steel
Mounting hole Size: 10mm
Mounting Panel Thickness: 1mm-6mm
Mounting Depth: 35mm
Operation Pressure: about 3n-5n
Operation Stroke: 2.5mm
LED Rated Voltage:  6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring)
          *note:  This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.
LED Life: About 40,000 hours
LED Power Draw: 15mA
Contact Resistance: 50 mOhm
Mechanical Life: 500,000 cycles
Switch Rating: 3A/250VDC

Installation

These are nice and easy to install, but if you have any concerns about installing I highly recommend having a skilled guitar repairer to carry out the install for you to save any issues caused. Some useful fitting instructions can be found HERE. Or alternatively, if you are local, then I am more than happy to carry out professional installation here. Please check out the Guitar Services page HERE

This package comes with everything:

(1) Tesi MIMMO 10mm Momentary Guitar Kill Switch  
(1) Tesi Quick-Connect wiring Bundle that includes:
     (1) 8" Black ground wire (already attached)
     (1) 8" White hot wire (already attached)
     (1) 8" 9V Battery Harness with 330 Ohm resistor
     (1) On/Off Rocker Switch
(1) Set of easy-to-follow wiring instructions
(1) Spare 270 Ohm resistor for custom wiring jobs

When used with active pickups and/or a stereo output jack (not included) the Tesi MIMMO does not require the additional on/off rocker switch.

PLEASE NOTE: Do not try to connect the switch directly to a battery. The LED is a 6V bulb and requires a resistor with a minimum value of 270 Ohms to work with a 9V battery.  Using a 9V battery without the resistor voids the warranty on the switch.

Ordering/shipping

Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE