Seymour Duncan Pickups - Antiquity II neck & bridge pickup set for Jazzmaster
Please use the tabs below to read through the information about this product.
About Antiquity
Seymour Duncan have long cemented themselves as the leading aftermarket pickup brand in the world, offering a staggering selection of models, and doing so affordably too. The Antiquity range was introduced as part of their Custom Shop, seeing these hand made pickups able to take on quality vintage and vintage mod specs that the market demands. Antiquities feature some subtle aging to the bobbins, pole pieces and fixings making them a great option for relic projects, vintage instruments and so on.
About the Jazzmaster Antiquity II
I have been able to install and play through many of these sets over the years, and always impressed with the quality and vintage correct 60s JM tones available from them. A pleasure to now be a Seymour Duncan main dealer and have these offered at the Home of Tone alongside my other brands and products, I feel they're a great fit to cater to my offset community following!
What SD say:
"The Antiquity II for Jazzmaster vintage single-coil pickup uses hand-ground Alnico 5 rod magnets, with our special coil wind to deliver bright, ’60s Jazzmaster tone that is glassy and crisp, with just the right balance of bridge position snap. Chords have a sharp, clear quality, and solos really jump out with that bright, ’60s surf tone.
Use with the RWRP Antiquity II Jazzmaster neck pickup for hum-canceling performance in the middle position. These pickups are drop-in replacements for any Fender American Standard sized Jazzmaster pickup, and will fit nicely into the existing cover.
Hand built in our Custom Shop, the Antiquity II for Jazzmaster vintage single-coils use hand ground Alnico 5 rod magnets, a custom coil wind with plain enamel mag wire, vintage-correct gray flatwork, cloth push-back lead wire, and are all lacquered and wax potted like the originals."
Please note, this pickup set doesn't come supplied with a set of covers, but are standard size so will drop into the guitars existing covers. If you do need some for a new project/build though, I stock a selection of popular JM pickup cover colours HERE by the pair or singular depending on your requirements.
Nerdy specs
Magnet - Alnico 5
Type - Passive
Wire type - 22awg cloth push-back 2 conductor (hot and ground)
DCR neck - 8.20k
DCR bridge - 8.60k
Bobbin - Grey fibreboard
Polarity - RWRP neck for hum-cancelling middle position
Dimensions - Click here for sizing spec sheet
Recommended wiring - These pickups are designed to be respectful of the vintage 60s design, therefore generally speaking people will be pairing these with vintage JM wiring specs too. Ultimately, it is down to personal preference but if you want that Jazzmaster vintage chime, then 1MEG lead circuit pots with 0.033uF for early JM spec, or 1MEG with 0.1uF for '65 JM spec will suit these great. Want to tame more of the top end? Then perhaps consider 500k pots instead. For lots more information on Jazzmaster wiring specs and options, consider checking out my JM pre-wired harnesses too.
What's included?
Inside the box you'll find the neck and bridge pickups, along with a set of relic mounting screws for each, and a wiring guide which covers traditional installs. The Antiquity pickups do not come with new covers, nor do they come with the height adjustment foams. But I do carry stock of a selection of Jazzmaster pickup covers HERE, as well as the height adjustment foams HERE. So if you're installing these pickups into a fresh project/build, I hope these additionally stocked items help out! If you're installing these pickups into an existing guitar, then simply re-use the original foam and covers.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional Jazzmaster single coil pickup. They are two wire (one hot, one ground) making for a very simple install process. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Seymour Duncan pickups from the Home of Tone?
The Home of Tone are an authorised main dealer for Seymour Duncan. What that means is stock is carried here on site for prompt service and dispatch as well as assurance that you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too should you need it. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Seymour Duncan pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select the 'pickup in store' option at the checkout. Or drop me a message and I'll reserve the items ready for your visit to pay onsite instead.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE
Please use the tabs below to read through the information about this product.
About Antiquity
Seymour Duncan have long cemented themselves as the leading aftermarket pickup brand in the world, offering a staggering selection of models, and doing so affordably too. The Antiquity range was introduced as part of their Custom Shop, seeing these hand made pickups able to take on quality vintage and vintage mod specs that the market demands. Antiquities feature some subtle aging to the bobbins, pole pieces and fixings making them a great option for relic projects, vintage instruments and so on.
About the Jazzmaster Antiquity II
I have been able to install and play through many of these sets over the years, and always impressed with the quality and vintage correct 60s JM tones available from them. A pleasure to now be a Seymour Duncan main dealer and have these offered at the Home of Tone alongside my other brands and products, I feel they're a great fit to cater to my offset community following!
What SD say:
"The Antiquity II for Jazzmaster vintage single-coil pickup uses hand-ground Alnico 5 rod magnets, with our special coil wind to deliver bright, ’60s Jazzmaster tone that is glassy and crisp, with just the right balance of bridge position snap. Chords have a sharp, clear quality, and solos really jump out with that bright, ’60s surf tone.
Use with the RWRP Antiquity II Jazzmaster neck pickup for hum-canceling performance in the middle position. These pickups are drop-in replacements for any Fender American Standard sized Jazzmaster pickup, and will fit nicely into the existing cover.
Hand built in our Custom Shop, the Antiquity II for Jazzmaster vintage single-coils use hand ground Alnico 5 rod magnets, a custom coil wind with plain enamel mag wire, vintage-correct gray flatwork, cloth push-back lead wire, and are all lacquered and wax potted like the originals."
Please note, this pickup set doesn't come supplied with a set of covers, but are standard size so will drop into the guitars existing covers. If you do need some for a new project/build though, I stock a selection of popular JM pickup cover colours HERE by the pair or singular depending on your requirements.
Nerdy specs
Magnet - Alnico 5
Type - Passive
Wire type - 22awg cloth push-back 2 conductor (hot and ground)
DCR neck - 8.20k
DCR bridge - 8.60k
Bobbin - Grey fibreboard
Polarity - RWRP neck for hum-cancelling middle position
Dimensions - Click here for sizing spec sheet
Recommended wiring - These pickups are designed to be respectful of the vintage 60s design, therefore generally speaking people will be pairing these with vintage JM wiring specs too. Ultimately, it is down to personal preference but if you want that Jazzmaster vintage chime, then 1MEG lead circuit pots with 0.033uF for early JM spec, or 1MEG with 0.1uF for '65 JM spec will suit these great. Want to tame more of the top end? Then perhaps consider 500k pots instead. For lots more information on Jazzmaster wiring specs and options, consider checking out my JM pre-wired harnesses too.
What's included?
Inside the box you'll find the neck and bridge pickups, along with a set of relic mounting screws for each, and a wiring guide which covers traditional installs. The Antiquity pickups do not come with new covers, nor do they come with the height adjustment foams. But I do carry stock of a selection of Jazzmaster pickup covers HERE, as well as the height adjustment foams HERE. So if you're installing these pickups into a fresh project/build, I hope these additionally stocked items help out! If you're installing these pickups into an existing guitar, then simply re-use the original foam and covers.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional Jazzmaster single coil pickup. They are two wire (one hot, one ground) making for a very simple install process. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Seymour Duncan pickups from the Home of Tone?
The Home of Tone are an authorised main dealer for Seymour Duncan. What that means is stock is carried here on site for prompt service and dispatch as well as assurance that you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too should you need it. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Seymour Duncan pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select the 'pickup in store' option at the checkout. Or drop me a message and I'll reserve the items ready for your visit to pay onsite instead.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE