Fender Cunife® Wide Range Jazzmaster® Bridge Pickup
Please use the tabs below to read through the information about this product.
About the Cunife® Wide Range Jazzmaster® Pickup set
I have been able to install and play a number of these CuNiFe WRH Fender Jazzmaster pickups and really like them. Some great mid range push, and classic WRH character to them, which always lends itself so well to a Jazzmaster in my opinion. Take gain and fuzz really well too! I have also supplied countless pre-wired Jazzmaster harnesses for customers who are fitting CuNiFe WRH Jazzmaster pickups, proving how popular they have been since their release, and for good reason. A real pleasure to now be carrying stock here at the Home of Tone of these wicked pickups! A great option if you want the WRH tone in your JM without needing to swap pickguards or carry out body modifications. This listing is specifically for a bridge position CuNiFe WRH for Jazzmaster only. If you would prefer a set, check out the dedicated set listing HERE
What Fender say;
"Supercharge your Jazzmaster® with classic Fender wide range humbuckers that will fit any Jazzmaster with no modifications needed. Everything that you love about the Wide Range humbucker but in a Jazzmaster cover. The Wide Range CuNiFe® Jazzmaster pickups deliver rich bell-like humbucking tone with full bass and clear treble. CuNiFe pickups have "hi-fi" clarity yet never lose their attack and definition no matter how hard they are pushed. Sought after by musicians of all genres for decades, the original-era real CuNiFe magnet pickups disappeared when the Telecaster Custom was discontinued in 1979."
Nerdy specs
Magnet - CuNiFe
Type - Passive
Magnet wire - Polysol-coated
Wire type - Vinyl-covered 2 conductor
Pole pieces- adjustable
DCR bridge - 11.5k
Bobbin - Nylon
Wax potted
Recommended wiring - Fender recommend for the CuNiFe WRH for Jazzmaster to be paired with 1MEG lead circuit pots and a 0.1uF tone cap. Ultimately, it is down to personal preference but I have personally installed these pickups to match this spec and it works really, really well so would be my personal recommendation also. If you have a traditional single coil equipped JM, there is good chance your guitar already has 1MEG pots, but if you need to order those, or need to order a 0.1uF tone cap I stock both separately. For lots more information on Jazzmaster wiring specs and options, consider checking out my JM pre-wired harnesses too.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional Jazzmaster single coil pickup. They are three wire (one hot, one ground, one 'bare' baseplate ground wire) making for a very simple install process. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Fender pickups from the Home of Tone?
The Home of Tone are an authorised dealer for Fender parts. What that means is stock is carried here on site for prompt service and dispatch as well as assurance you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Fender pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE
Please use the tabs below to read through the information about this product.
About the Cunife® Wide Range Jazzmaster® Pickup set
I have been able to install and play a number of these CuNiFe WRH Fender Jazzmaster pickups and really like them. Some great mid range push, and classic WRH character to them, which always lends itself so well to a Jazzmaster in my opinion. Take gain and fuzz really well too! I have also supplied countless pre-wired Jazzmaster harnesses for customers who are fitting CuNiFe WRH Jazzmaster pickups, proving how popular they have been since their release, and for good reason. A real pleasure to now be carrying stock here at the Home of Tone of these wicked pickups! A great option if you want the WRH tone in your JM without needing to swap pickguards or carry out body modifications. This listing is specifically for a bridge position CuNiFe WRH for Jazzmaster only. If you would prefer a set, check out the dedicated set listing HERE
What Fender say;
"Supercharge your Jazzmaster® with classic Fender wide range humbuckers that will fit any Jazzmaster with no modifications needed. Everything that you love about the Wide Range humbucker but in a Jazzmaster cover. The Wide Range CuNiFe® Jazzmaster pickups deliver rich bell-like humbucking tone with full bass and clear treble. CuNiFe pickups have "hi-fi" clarity yet never lose their attack and definition no matter how hard they are pushed. Sought after by musicians of all genres for decades, the original-era real CuNiFe magnet pickups disappeared when the Telecaster Custom was discontinued in 1979."
Nerdy specs
Magnet - CuNiFe
Type - Passive
Magnet wire - Polysol-coated
Wire type - Vinyl-covered 2 conductor
Pole pieces- adjustable
DCR bridge - 11.5k
Bobbin - Nylon
Wax potted
Recommended wiring - Fender recommend for the CuNiFe WRH for Jazzmaster to be paired with 1MEG lead circuit pots and a 0.1uF tone cap. Ultimately, it is down to personal preference but I have personally installed these pickups to match this spec and it works really, really well so would be my personal recommendation also. If you have a traditional single coil equipped JM, there is good chance your guitar already has 1MEG pots, but if you need to order those, or need to order a 0.1uF tone cap I stock both separately. For lots more information on Jazzmaster wiring specs and options, consider checking out my JM pre-wired harnesses too.
Demos
Installation
These pickups are a direct replacement in terms of sizing and spec for a traditional Jazzmaster single coil pickup. They are three wire (one hot, one ground, one 'bare' baseplate ground wire) making for a very simple install process. If by chance you aren't comfortable installing these pickups yourself, and are local to the Home of Tone, then I offer professional in-house installation. If you are installing them yourself, then I am of course here for any installation advise too.
Do you have them in stock?
You betcha'. These are in stock, here at James' Home of Tone available for collection and ordering.
Why buy Fender pickups from the Home of Tone?
The Home of Tone are an authorised dealer for Fender parts. What that means is stock is carried here on site for prompt service and dispatch as well as assurance you are ordering your new pickups for an official, authorised dealer. Having long been specialising in guitar electronics, I can offer you installation advise, as well as installation services on site along with any support required. As well as offering friendly, knowledgable advise prior to ordering too. I offer a broad range of quality hand made pre-wired kits, which may also help with your project. You'll also be supporting a small, independant business in the process too which is always hugely appreciated! Thank you for considering your new Fender pickup set from the Home of Tone.
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE