Pre-Wired Guitar wiring harness | Full Jazzmaster kit Series Mod | Right Handed
Please use the tabs below to read through the information about this Pre-Wired harness kit. From a run down of what the kit does, to important fitting information and full specs.
Order times
I usually make harnesses to order, due to the variety of spec options that could be chosen across the whole range. The current turnaround time for a Jazzmaster harness order is around 5-7 working days depending on quantity of orders in at the time and your order will be updated accordingly when it is dispatched. This turnaround time doesn't include the transit time. Thanks for your patience whilst I get your harness made!
Model Description
It's no secret that I love Jazzmasters. From the comfort of the offset body shape, to the intuitive vibrato and ultimately, the sound. So this harness was definitely driven by the passion I have for pushing the traditional spec further.
A few years ago, I was asked to make a couple of wiring looms for Smitty Custom Guitars, where their customer had asked for a few twists on the classic JM wiring style, one option was a series/parallel switch. This was an idea I really liked and after wiring up those I decided to do a little testing and offer it as part of my JM wiring range. I liked it that much it ended up being the wiring I use on my own personal Jazzmaster, as you get all of the the traditional JM controls I love with the added benefit of an extra, really use-able tone with the series mod.
It is essentially a regular JM loom, but the lead circuit tone pot is replaced by a push/pull pot. In the ‘down’ regular position you can enjoy a traditional JM control layout, but pull the tone pot up and you will put your neck and bridge pickups together in series. Resulting in a bigger, thicker, beefier and all round monster tone! (also a bit of a boost in output compared to the standard parallel position too). In my humble opinion, jazzmaster single coils sound great together in series, adding a fun sound to the traditional Jazzmaster.
There are a couple of things to note though, most importantly is the pot spec. I much, much prefer the CTS 450 series push/pull pots over any other P/P pot on the market, so only want to use those in this kit, but sadly no one yet commissions those to be made in 1MEG. So please note, this spec kit isn’t available with the traditional Jazzmaster 1MEG lead circuit pots, only with 500k which captures a lot of the Jazzmaster sound but without the more ice-pick like trebles (so maybe a good thing?!). Or alternatively, I also offer this kit with 250k pots, if you prefer a warmer tone.
The series mode isn't limited to the rhythm circuit, however. If you're up playing in the rhythm circuit, and pull up the lead circuit tone push/pull, it will still put the pickups in series, but this time using the rhythm circuit pot specs for another tonal flavour. Those familiar with a JM rhythm circuit will know that when in that circuit only your neck pickups is active. Well pull up the series switch and you’ll be able to add the bridge pickup in series, in the rhythm circuit! Which sounds quite different to the lead circuit series mode due to the different pot and cap values between the two circuits.
Please note, website example photo(s) may differ visually from the wiring kit you receive. This could be for a number of reasons but ultimately, don't be alarmed if you do spot differences between the stock photo and your supplied kit.
Product options
Lead circuit pot spec
As noted in the main model description section, due to the limitation of there being no available CTS 450 series push/pull pot in 1MEG spec, I only offer the Series mod kit with 500k, or 250k pots.
500k pots will mostly capture the overall vibe of a Jazzmaster sound, but will tame the top end found in traditionally spec'd 1MEG Jazzmasters. If you're hoping to capture a traditional Jazzmaster tone, I would recommend the 500k spec for this particular kit.
250k pots will provide a warmer tone by comparison to the 500k pots, and for those that are chasing a warmer tone from their guitar, or have a set of pickups better suited to this pot spec.
Lead circuit cap spec
Similarly to the choices between pots, I also offer the choice of lead circuit tone capacitor value.
From 1958 through to 1965, traditionally Jazzmasters were equipped with a .033uF tone capacitor. So if you're looking for traditional/vintage style specs, this may well be the choice for you.
For 500k or 250k pots, then you may find a .033uF will soften the top end too much or create a less gradual tone pot sweep, so I also offer a .022uF cap value. Simply put, a .022uF will sound a little brighter than a .033uF cap and is a very popular pairing for 500k pots or 250k pots (as well as a popular choice for humbuckers or P90s for example if your JM has alternative pickup types).
With or without Treble Bleed?
First up, what does it do? Without a 'treble bleed', when you roll down the volume pot it will naturally lose some of the treble frequencies through the sweep. A Treble Bleed kit takes the 'high' treble tone frequencies out of the circuit at the volume pot, and puts them back in the circuit as the signal leaves the volume pot. This means the treble frequencies are prevented from naturally bleeding out of the circuit as your turn your volume pot down. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. Some guitar players wouldn't be without a treble bleed, and many have never used one on their guitars. Truth is, it is very much personal preference. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you! For the standard spec, I use a ceramic .001uF capacitor with a carbon film 120kOhm resistor parallel wired.
Wiring diagram and wiring info
Pre-Wired kit general fitting guide - HERE
Wiring Diagram - HERE
Soldering ground wires to pot casings - HERE
Wiring FAQs - HERE
Fitting information
I have intended for my wiring harnesses to be as simple as possible to install to your Jazzmaster, but in this section you'll find some important fitting notes that will hopefully help you assess whether the kit is suitable for your exact JM or what is required to allow it to fit correctly.
As the push/pull pot sits deeper than a standard pot, it may also be worth double checking the cavity depth in your specific Jazzmaster to ensure it will fit this deeper pot size. The CTS push/pull pot measures 31mm, from pickguard edge to top of pot casing. Traditional Jazzmaster body cavities will accomodate for this, but it is certainly worth double checking yours prior to ordering/installing.
Can I fit this kit myself?
This ultimately comes down to whether you own the equipment needed to correctly and safely install the kit, or how comfortable you feel working on your own guitar. I do feel that installing a pre-wired guitar harness is do-able for many guitarists but only if the correct tools are used and care is taken to ensure you do not damage the kit, your guitar or yourself! There are detailed installation guides here on my website, as well as simple to follow wiring diagrams all to help make the process as easy as possible and in my experience, these have helped thousands of my customers carry out their own install. But if for any reason you have concerns about fitting the kit yourself which is entirely understandable, then I'm sure you'll agree that it is likely best to have a professional fit the kit and help ensure your purchased kit, and your beloved guitar are both looked after and worked on correctly.
If you are local to me (Stourbridge, West Midlands) I take on guitar work no problem at all so will certainly be able to help install your Signature Series harness.
I would also note here, that soldering the pickup wires onto the tighter push/pull pot might be tricky for some installers. If you are well acquainted with a soldering iron, you'll sail it I'm sure, but if you a new to soldering, I would perhaps recommend having a trusted local tech install this kit for you to ensure no damage is caused to the components and it all functions correctly.
Will the pots/jack fit my pickguard and jack plate?
The components I use in my Signature Series wiring kits are for the most part, USA imperial specification, and will be a direct replacement for a genuine USA or Mexico made Fender Jazzmaster. If you're fitting this harness to different model/spec of Jazzmaster, or a far east built guitar such as a Squier or similar brand, then you may have to widen the holes in the pickguard to accommodate for these imperial measurement pots. The CTS pots and Pure Tone multi contact jack have a mounting thread shaft diameter of 0.369" / 9.38mm so I recommend for ease of install a pickguard and/or jackplate with 0.394" / 10mm pot/jack mounting holes. You can easily widen the holes in the Pickguard too if you would prefer, I recommend doing this safely with a step cutter drill bit. I also offer this as a service so if you would like me to widen your plate for you, do please get in touch and we can organise this additionally.
What control knobs will fit?
The kit uses CTS Split shaft pots. Split shaft pots have a adjustable split shaft diameter of 5.95mm w/ 24 splines. You will need control knobs that push-fit and suit these measurements.
Do not attempt to force fit smaller, metric/import spec control knobs onto the imperial USA spec pots, doing this can damage the pot.
If you do require a US spec control knobs, I do carry a selection of popular options in stock and they can be viewed in the Control Knob category on the store.
Want to use 1/4" solid shaft style control knobs? No problem, you can simply install some brass conversion sleeves onto the split shaft pots and you'll then be able to do so.
The harness does come supplied with the roller wheel control knobs pre fitted on the rhythm circuit controls for you. Those secure to the pot shaft with a grub screw.
Which switch tip will fit?
Much like with the control knobs, the Switchcraft pickup selector in this kit is USA spec, with imperial thread sizes. Therefore you need a imperial thread switch toggle tip to suit Switchcraft toggles.
If you do require a US spec switch tip, I do carry a selection of popular options in stock and they can be viewed in the Switch Tips category on the store.
Specs/Parts included
- Choice of lead circuit pot values/specs:
2x CTS 450 Series 250k (volume and push/pull tone)
2x CTS 450 Series 500k (volume and push/pull tone)
- 1x .022uF or .033uF Mustard tone capacitor in the lead circuit
- 1x .022uF 'Yellow Mustard' type tone capacitor in the rhythm circuit
- 1x Switchcraft right angle 3 way toggle switch
- 1x Switchcraft 2 position DPDT slide switch
- 1x Right angle rhythm circuit mounting bracket
- 2x Roller wheel control knobs for ryhytm circuit
- 1x Alpha 1MEG Lin mini pot
- 1x Alpha 50k Lin mini pot
- 1x Pure Tone multi contact jack socket
- Gavitt USA made cloth covered 22AWG wire
- 20AWG Tinned copper ground
- Soldered using R-Tech Premium Lead-Free (Sn95.5Ag3.9Cu0.6) 22swg Solder wire
RoHS Compliant
RoHS Compliant components are used throughout pre-wired assemblies. All components used in this assembly are being used for their intended purposes stated in the guidelines by their relevant manufacturer. Any use outside of stated or recommended guidelines is entirely up to the customer, but sales support/warranty/refunds are then extinguished. For a run down of the manufacturers and product data sheets you can click HERE
Please note - wiring kit does not include new lead circuit control knobs/switch tip etc but does include the switch/pot/jack mounting nuts, washers & screws and does include the rhythm circuit roller wheels. Please see above spec/item list for full detailed run down of what is included or drop me a message if you aren't 100% sure.
Why these spec parts over others available?
Simply put, component choice has been one of the most important parts of my product development. I have worked on guitars for many years, and built these kits professionally since 2015, and as a result have been able to see and experience working on the majority of components available on the market. In my findings, A/B testing and more, I have found the components I decided on for my Signature Series to be the most reliable, best tolerance and great functioning parts to use to help customers get the most out of their instruments. I use CTS '450' series premium spec pots as they have a tight tolerance, and will consistently provide me with accurate value, as well as very solid build quality. I use trusty 'Mustard' style polyester film 'tone' capacitors as in my opinion they simply can't be beat for great value, solid construction, solid lead-outs, super tight tolerances and reliable tone/function. I would personally much rather use a trusty Mustard for example over something like a paper in oil, as from experience that are so much more reliable to use. This is from carrying out a lot of A/B testing, both tonally, as well as armed with the multi-meter for testing values and actual tolerances, as well as handling them to test construction quality for long lasting reliability in use. I use the brilliant 'Pure Tone' Multi Contact Jack sockets as they are incredibly reliable, due to their additional contact points for both tip and sleeve. I use CRL, Oak and Switchcraft brand switches across the range as these are built very well, with care will last for many years to come and have long since provided me with reliable use professionally. All kits are wired up with quality USA made Gavitt wire, it's great to work with, super consistent gauge and provides me with a very reliable quality item for my kits. I totally understand that with anything guitar, it is subjective, but I have, with an open mind, thoroughly tested a broad variety of components over the years and these have all become the items I trust to use every day.
Harness FAQ's
I've been proudly making, developing and installing my pre-wired guitar harnesses since the beginning of the Home of Tone back in 2015 (time flies when you're having fun right!). Although I feel I do my best in covering as much information as possible across the various product listings, fitting guides, wiring diagrams and more, I thought it might be helpful to put together an FAQ's page that covers some of the general additional questions I get asked. You can view these Harness FAQ's HERE
'Ground Bug' deal!
Looking forward to installing your new wiring, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do.
I have been stocking Ground Bugs for a while, and they really are the perfect match for a pre-wired harness as they further help you with your installs. So I have set up a 10% off Ground Bug deals when purchased with a Home of Tone Signature Series pre-wired harness. This is an automatic discount code, so all you need to have is a Signature Series kit, and a Ground bug in your cart, and the discount will automatically be applied to the bug for you! Click HERE to view the Ground Bug listing
Do you make custom harnesses?
I'm afraid I do not offer a custom harness service. Only kits developed, tested and listed on my website are the available kits. So no custom schematics etc. If you happen to be local to my office, then I do carry out custom work in house, but in regards to shipped out pre-wired harnesses I do not offer custom kits. I am however happy to use different pot values or cap values within reason if you have a specific requirement that differs to the specs listed above. If this is relevant to yourself then please get in touch to discuss further to ensure the request is possible.
GPSR & Safety info
Manufacturer: James' Home of Tone, Laburnum Street, Stourbridge, DY8 4NX, UK.
Email: james@homeoftone.co.uk
EU Authorised Representative: Global Trade Department (NI) Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast, BT9 6AG, Northern Ireland. Email: contact@globaltradedept.com
Intended user: The Signature Series pre-wired electric guitar and electric bass guitar harnesses are only intended to be used by an adult (over the age of 18). By a guitar repair professional, or someone with sufficient repair/modification experience.
Intended use: The Signature Series pre-wired electric guitar and electric bass guitar harness is a replacement and/or upgraded pre-wired harness kit that you can use to replace, retrofit or upgrade the volume, tone and pickup selection controls in an electric guitar or electric bass guitar. The Signature Series pre-wired electric guitar and electric bass guitar harness kit offers a quality, pre-assembled harness solution for your electric guitar or electric bass guitar model. Your existing guitar pickups can be installed to this pre-wired harness kit, to allow a factory equivalent or alternative control layout for your electric guitar or electric bass guitar as desired.
Full installation guidance can be found on each specific kits product listing, with detailed fitting notes and requirements along with links to the specific wiring diagram. Before starting any install, the full guides must be read to ensure a safe install process throughout. James' Home of Tone cannot and will not be held liable for any injury or damage caused by incorrect methods, handling and techniques whilst installing a Signature Series pre-wired kit. Professional installation only recommended.
The Signature Series Pre-Wired electric guitar harness is intended to be used for:
▪ The specific model of guitar or bass that is detailed in the product description
▪ A like-for-like replacement or upgrade retrofit for your guitar or basses existing volume, tone and pickup selection controls
▪ Adjusting the pickup selection, volume and tone where applicable on an amplified electric guitar during use
The Signature Series Pre-Wired electric guitar harness is not intended to be used:
▪ In a guitar or bass model that it is not specifically designed and advertised for
▪ where modifications to the kit, its schematic or its components are carried out
Please use the tabs below to read through the information about this Pre-Wired harness kit. From a run down of what the kit does, to important fitting information and full specs.
Order times
I usually make harnesses to order, due to the variety of spec options that could be chosen across the whole range. The current turnaround time for a Jazzmaster harness order is around 5-7 working days depending on quantity of orders in at the time and your order will be updated accordingly when it is dispatched. This turnaround time doesn't include the transit time. Thanks for your patience whilst I get your harness made!
Model Description
It's no secret that I love Jazzmasters. From the comfort of the offset body shape, to the intuitive vibrato and ultimately, the sound. So this harness was definitely driven by the passion I have for pushing the traditional spec further.
A few years ago, I was asked to make a couple of wiring looms for Smitty Custom Guitars, where their customer had asked for a few twists on the classic JM wiring style, one option was a series/parallel switch. This was an idea I really liked and after wiring up those I decided to do a little testing and offer it as part of my JM wiring range. I liked it that much it ended up being the wiring I use on my own personal Jazzmaster, as you get all of the the traditional JM controls I love with the added benefit of an extra, really use-able tone with the series mod.
It is essentially a regular JM loom, but the lead circuit tone pot is replaced by a push/pull pot. In the ‘down’ regular position you can enjoy a traditional JM control layout, but pull the tone pot up and you will put your neck and bridge pickups together in series. Resulting in a bigger, thicker, beefier and all round monster tone! (also a bit of a boost in output compared to the standard parallel position too). In my humble opinion, jazzmaster single coils sound great together in series, adding a fun sound to the traditional Jazzmaster.
There are a couple of things to note though, most importantly is the pot spec. I much, much prefer the CTS 450 series push/pull pots over any other P/P pot on the market, so only want to use those in this kit, but sadly no one yet commissions those to be made in 1MEG. So please note, this spec kit isn’t available with the traditional Jazzmaster 1MEG lead circuit pots, only with 500k which captures a lot of the Jazzmaster sound but without the more ice-pick like trebles (so maybe a good thing?!). Or alternatively, I also offer this kit with 250k pots, if you prefer a warmer tone.
The series mode isn't limited to the rhythm circuit, however. If you're up playing in the rhythm circuit, and pull up the lead circuit tone push/pull, it will still put the pickups in series, but this time using the rhythm circuit pot specs for another tonal flavour. Those familiar with a JM rhythm circuit will know that when in that circuit only your neck pickups is active. Well pull up the series switch and you’ll be able to add the bridge pickup in series, in the rhythm circuit! Which sounds quite different to the lead circuit series mode due to the different pot and cap values between the two circuits.
Please note, website example photo(s) may differ visually from the wiring kit you receive. This could be for a number of reasons but ultimately, don't be alarmed if you do spot differences between the stock photo and your supplied kit.
Product options
Lead circuit pot spec
As noted in the main model description section, due to the limitation of there being no available CTS 450 series push/pull pot in 1MEG spec, I only offer the Series mod kit with 500k, or 250k pots.
500k pots will mostly capture the overall vibe of a Jazzmaster sound, but will tame the top end found in traditionally spec'd 1MEG Jazzmasters. If you're hoping to capture a traditional Jazzmaster tone, I would recommend the 500k spec for this particular kit.
250k pots will provide a warmer tone by comparison to the 500k pots, and for those that are chasing a warmer tone from their guitar, or have a set of pickups better suited to this pot spec.
Lead circuit cap spec
Similarly to the choices between pots, I also offer the choice of lead circuit tone capacitor value.
From 1958 through to 1965, traditionally Jazzmasters were equipped with a .033uF tone capacitor. So if you're looking for traditional/vintage style specs, this may well be the choice for you.
For 500k or 250k pots, then you may find a .033uF will soften the top end too much or create a less gradual tone pot sweep, so I also offer a .022uF cap value. Simply put, a .022uF will sound a little brighter than a .033uF cap and is a very popular pairing for 500k pots or 250k pots (as well as a popular choice for humbuckers or P90s for example if your JM has alternative pickup types).
With or without Treble Bleed?
First up, what does it do? Without a 'treble bleed', when you roll down the volume pot it will naturally lose some of the treble frequencies through the sweep. A Treble Bleed kit takes the 'high' treble tone frequencies out of the circuit at the volume pot, and puts them back in the circuit as the signal leaves the volume pot. This means the treble frequencies are prevented from naturally bleeding out of the circuit as your turn your volume pot down. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. Some guitar players wouldn't be without a treble bleed, and many have never used one on their guitars. Truth is, it is very much personal preference. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you! For the standard spec, I use a ceramic .001uF capacitor with a carbon film 120kOhm resistor parallel wired.
Wiring diagram and wiring info
Pre-Wired kit general fitting guide - HERE
Wiring Diagram - HERE
Soldering ground wires to pot casings - HERE
Wiring FAQs - HERE
Fitting information
I have intended for my wiring harnesses to be as simple as possible to install to your Jazzmaster, but in this section you'll find some important fitting notes that will hopefully help you assess whether the kit is suitable for your exact JM or what is required to allow it to fit correctly.
As the push/pull pot sits deeper than a standard pot, it may also be worth double checking the cavity depth in your specific Jazzmaster to ensure it will fit this deeper pot size. The CTS push/pull pot measures 31mm, from pickguard edge to top of pot casing. Traditional Jazzmaster body cavities will accomodate for this, but it is certainly worth double checking yours prior to ordering/installing.
Can I fit this kit myself?
This ultimately comes down to whether you own the equipment needed to correctly and safely install the kit, or how comfortable you feel working on your own guitar. I do feel that installing a pre-wired guitar harness is do-able for many guitarists but only if the correct tools are used and care is taken to ensure you do not damage the kit, your guitar or yourself! There are detailed installation guides here on my website, as well as simple to follow wiring diagrams all to help make the process as easy as possible and in my experience, these have helped thousands of my customers carry out their own install. But if for any reason you have concerns about fitting the kit yourself which is entirely understandable, then I'm sure you'll agree that it is likely best to have a professional fit the kit and help ensure your purchased kit, and your beloved guitar are both looked after and worked on correctly.
If you are local to me (Stourbridge, West Midlands) I take on guitar work no problem at all so will certainly be able to help install your Signature Series harness.
I would also note here, that soldering the pickup wires onto the tighter push/pull pot might be tricky for some installers. If you are well acquainted with a soldering iron, you'll sail it I'm sure, but if you a new to soldering, I would perhaps recommend having a trusted local tech install this kit for you to ensure no damage is caused to the components and it all functions correctly.
Will the pots/jack fit my pickguard and jack plate?
The components I use in my Signature Series wiring kits are for the most part, USA imperial specification, and will be a direct replacement for a genuine USA or Mexico made Fender Jazzmaster. If you're fitting this harness to different model/spec of Jazzmaster, or a far east built guitar such as a Squier or similar brand, then you may have to widen the holes in the pickguard to accommodate for these imperial measurement pots. The CTS pots and Pure Tone multi contact jack have a mounting thread shaft diameter of 0.369" / 9.38mm so I recommend for ease of install a pickguard and/or jackplate with 0.394" / 10mm pot/jack mounting holes. You can easily widen the holes in the Pickguard too if you would prefer, I recommend doing this safely with a step cutter drill bit. I also offer this as a service so if you would like me to widen your plate for you, do please get in touch and we can organise this additionally.
What control knobs will fit?
The kit uses CTS Split shaft pots. Split shaft pots have a adjustable split shaft diameter of 5.95mm w/ 24 splines. You will need control knobs that push-fit and suit these measurements.
Do not attempt to force fit smaller, metric/import spec control knobs onto the imperial USA spec pots, doing this can damage the pot.
If you do require a US spec control knobs, I do carry a selection of popular options in stock and they can be viewed in the Control Knob category on the store.
Want to use 1/4" solid shaft style control knobs? No problem, you can simply install some brass conversion sleeves onto the split shaft pots and you'll then be able to do so.
The harness does come supplied with the roller wheel control knobs pre fitted on the rhythm circuit controls for you. Those secure to the pot shaft with a grub screw.
Which switch tip will fit?
Much like with the control knobs, the Switchcraft pickup selector in this kit is USA spec, with imperial thread sizes. Therefore you need a imperial thread switch toggle tip to suit Switchcraft toggles.
If you do require a US spec switch tip, I do carry a selection of popular options in stock and they can be viewed in the Switch Tips category on the store.
Specs/Parts included
- Choice of lead circuit pot values/specs:
2x CTS 450 Series 250k (volume and push/pull tone)
2x CTS 450 Series 500k (volume and push/pull tone)
- 1x .022uF or .033uF Mustard tone capacitor in the lead circuit
- 1x .022uF 'Yellow Mustard' type tone capacitor in the rhythm circuit
- 1x Switchcraft right angle 3 way toggle switch
- 1x Switchcraft 2 position DPDT slide switch
- 1x Right angle rhythm circuit mounting bracket
- 2x Roller wheel control knobs for ryhytm circuit
- 1x Alpha 1MEG Lin mini pot
- 1x Alpha 50k Lin mini pot
- 1x Pure Tone multi contact jack socket
- Gavitt USA made cloth covered 22AWG wire
- 20AWG Tinned copper ground
- Soldered using R-Tech Premium Lead-Free (Sn95.5Ag3.9Cu0.6) 22swg Solder wire
RoHS Compliant
RoHS Compliant components are used throughout pre-wired assemblies. All components used in this assembly are being used for their intended purposes stated in the guidelines by their relevant manufacturer. Any use outside of stated or recommended guidelines is entirely up to the customer, but sales support/warranty/refunds are then extinguished. For a run down of the manufacturers and product data sheets you can click HERE
Please note - wiring kit does not include new lead circuit control knobs/switch tip etc but does include the switch/pot/jack mounting nuts, washers & screws and does include the rhythm circuit roller wheels. Please see above spec/item list for full detailed run down of what is included or drop me a message if you aren't 100% sure.
Why these spec parts over others available?
Simply put, component choice has been one of the most important parts of my product development. I have worked on guitars for many years, and built these kits professionally since 2015, and as a result have been able to see and experience working on the majority of components available on the market. In my findings, A/B testing and more, I have found the components I decided on for my Signature Series to be the most reliable, best tolerance and great functioning parts to use to help customers get the most out of their instruments. I use CTS '450' series premium spec pots as they have a tight tolerance, and will consistently provide me with accurate value, as well as very solid build quality. I use trusty 'Mustard' style polyester film 'tone' capacitors as in my opinion they simply can't be beat for great value, solid construction, solid lead-outs, super tight tolerances and reliable tone/function. I would personally much rather use a trusty Mustard for example over something like a paper in oil, as from experience that are so much more reliable to use. This is from carrying out a lot of A/B testing, both tonally, as well as armed with the multi-meter for testing values and actual tolerances, as well as handling them to test construction quality for long lasting reliability in use. I use the brilliant 'Pure Tone' Multi Contact Jack sockets as they are incredibly reliable, due to their additional contact points for both tip and sleeve. I use CRL, Oak and Switchcraft brand switches across the range as these are built very well, with care will last for many years to come and have long since provided me with reliable use professionally. All kits are wired up with quality USA made Gavitt wire, it's great to work with, super consistent gauge and provides me with a very reliable quality item for my kits. I totally understand that with anything guitar, it is subjective, but I have, with an open mind, thoroughly tested a broad variety of components over the years and these have all become the items I trust to use every day.
Harness FAQ's
I've been proudly making, developing and installing my pre-wired guitar harnesses since the beginning of the Home of Tone back in 2015 (time flies when you're having fun right!). Although I feel I do my best in covering as much information as possible across the various product listings, fitting guides, wiring diagrams and more, I thought it might be helpful to put together an FAQ's page that covers some of the general additional questions I get asked. You can view these Harness FAQ's HERE
'Ground Bug' deal!
Looking forward to installing your new wiring, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do.
I have been stocking Ground Bugs for a while, and they really are the perfect match for a pre-wired harness as they further help you with your installs. So I have set up a 10% off Ground Bug deals when purchased with a Home of Tone Signature Series pre-wired harness. This is an automatic discount code, so all you need to have is a Signature Series kit, and a Ground bug in your cart, and the discount will automatically be applied to the bug for you! Click HERE to view the Ground Bug listing
Do you make custom harnesses?
I'm afraid I do not offer a custom harness service. Only kits developed, tested and listed on my website are the available kits. So no custom schematics etc. If you happen to be local to my office, then I do carry out custom work in house, but in regards to shipped out pre-wired harnesses I do not offer custom kits. I am however happy to use different pot values or cap values within reason if you have a specific requirement that differs to the specs listed above. If this is relevant to yourself then please get in touch to discuss further to ensure the request is possible.
GPSR & Safety info
Manufacturer: James' Home of Tone, Laburnum Street, Stourbridge, DY8 4NX, UK.
Email: james@homeoftone.co.uk
EU Authorised Representative: Global Trade Department (NI) Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast, BT9 6AG, Northern Ireland. Email: contact@globaltradedept.com
Intended user: The Signature Series pre-wired electric guitar and electric bass guitar harnesses are only intended to be used by an adult (over the age of 18). By a guitar repair professional, or someone with sufficient repair/modification experience.
Intended use: The Signature Series pre-wired electric guitar and electric bass guitar harness is a replacement and/or upgraded pre-wired harness kit that you can use to replace, retrofit or upgrade the volume, tone and pickup selection controls in an electric guitar or electric bass guitar. The Signature Series pre-wired electric guitar and electric bass guitar harness kit offers a quality, pre-assembled harness solution for your electric guitar or electric bass guitar model. Your existing guitar pickups can be installed to this pre-wired harness kit, to allow a factory equivalent or alternative control layout for your electric guitar or electric bass guitar as desired.
Full installation guidance can be found on each specific kits product listing, with detailed fitting notes and requirements along with links to the specific wiring diagram. Before starting any install, the full guides must be read to ensure a safe install process throughout. James' Home of Tone cannot and will not be held liable for any injury or damage caused by incorrect methods, handling and techniques whilst installing a Signature Series pre-wired kit. Professional installation only recommended.
The Signature Series Pre-Wired electric guitar harness is intended to be used for:
▪ The specific model of guitar or bass that is detailed in the product description
▪ A like-for-like replacement or upgrade retrofit for your guitar or basses existing volume, tone and pickup selection controls
▪ Adjusting the pickup selection, volume and tone where applicable on an amplified electric guitar during use
The Signature Series Pre-Wired electric guitar harness is not intended to be used:
▪ In a guitar or bass model that it is not specifically designed and advertised for
▪ where modifications to the kit, its schematic or its components are carried out