Oak 4 Way Lever Switch For Tele


Made by Oak in the U.S.A. 4 position lever switch most commonly used on Fender Telecaster. Two mounting screws included.

Please note, the 4 way switch has a slightly increased throw angle when compared to a standard 3 way switch, sometimes requiring a wider slot control plate. Not all control plates can accommodate for a 4 way switch without minor modification. Some players file a very small amount off the slot in the plate, and some players prefer to file a little notch in the 4 way lever. But it is worth baring this in mind, the 4 way mod may require extra attention as noted here. I do however stock new control plates with a ever so slightly extended slot to accommodate for the 4 way switch! Those are listed in the parts/hardware section.

Although providing the same basic function to the CRL alternative, they have a slightly different design in they way perform it. The switch 'action' is down to a tiny roller wheel and small notches in the casing for it to click over and sit in the correct position. This does function very well, but to some players it can feel a little 'looser' in comparison to it's CRL counterpart. That's not necessarily a bad thing at all, as for quick pickup position changes, it's a breeze and many players prefer it. Connections are of great quality and I've happily used these switches as my standard option since introducing my harnesses here. 

Centre to centre of the two mounting holes - 41mm
4 Way 

In stock