CTS 270 Series guitar & bass MINI potentiometer - 500kΩ audio taper - split standard short shaft
Please use the tabs below to read through the information about this product.
About
I’m a big fan of CTS pots, I personally use the 270 and 450 series pots every working day on builds, pre-wired kits and in-house repairs, they're my go to pot brand/range.
This premium '450' series pot features a +/-10% tolerance in regards to it's resistance. It features a longer life-span brass shaft and bushing with a graphite wiper. Each pot comes complete with 1x 32UNEF-2A mount nut, 1x dress washer and 1x star tooth grip washer. Need to space the mounting thread for a more flush fit? Then you may require an additional mount nut to achieve that, those can be purchased additionally HERE.
This specific pot features the standard short (CTS bushing '3' spec) mounting thread length, and is split shaft trim. The split shaft basically means these will suit control knobs that secure in place via a push-to-fit design, more specifically suit control knobs with a 0.236" / 5.99mm diameter and 24 teeth/splines.
The 270 series are superb for ocassions where space is minimal. These mini sized pots are of equal quality and share many build features with their full size450 series counterparts, but offer guitars with tighter control cavity spacing the option to still have a quality pot and not an inferior item just because of size. I've used these on harnesses for Fender Coronado's and Epiphone Sheraton's where the f-hole is much smaller making it difficult to fit a full sized CTS pot through upon install. These worked great!
Specs and measurements
- 500kΩ resistance
- 10% resistance tolerance
- CTS 'A' 10% audio taper spec
- Shaft Style/Trim type - Split knurl w/24 teeth/splines
- Split Knurl trim size - 0.370" / 9.4mm long x 0.236" / 5.99mm diameter
- Overall height: 28mm
- Pot base diameter: 16mm
- Pot base height: 8mm
- Threaded brass bushing length - 0.375" / 9.53mm
- Threaded brass bushing diameter - 0.370" / 9.4mm
CTS RoHS compliance certificate
CTS REACH certificate of compliance
Hate soldering your ground wires to the pot casing? Check out the Ground Bug!
Looking forward to installing your new pot, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do.
I have been stocking Ground Bugs for a while, and they really are the perfect match when replacing a pot as they further help you with your installs. I stock a Ground Bug specifically designed for use with the CTS 270 mini series pots - Click HERE to view the Ground Bug 'Mini Mite'
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE
Please use the tabs below to read through the information about this product.
About
I’m a big fan of CTS pots, I personally use the 270 and 450 series pots every working day on builds, pre-wired kits and in-house repairs, they're my go to pot brand/range.
This premium '450' series pot features a +/-10% tolerance in regards to it's resistance. It features a longer life-span brass shaft and bushing with a graphite wiper. Each pot comes complete with 1x 32UNEF-2A mount nut, 1x dress washer and 1x star tooth grip washer. Need to space the mounting thread for a more flush fit? Then you may require an additional mount nut to achieve that, those can be purchased additionally HERE.
This specific pot features the standard short (CTS bushing '3' spec) mounting thread length, and is split shaft trim. The split shaft basically means these will suit control knobs that secure in place via a push-to-fit design, more specifically suit control knobs with a 0.236" / 5.99mm diameter and 24 teeth/splines.
The 270 series are superb for ocassions where space is minimal. These mini sized pots are of equal quality and share many build features with their full size450 series counterparts, but offer guitars with tighter control cavity spacing the option to still have a quality pot and not an inferior item just because of size. I've used these on harnesses for Fender Coronado's and Epiphone Sheraton's where the f-hole is much smaller making it difficult to fit a full sized CTS pot through upon install. These worked great!
Specs and measurements
- 500kΩ resistance
- 10% resistance tolerance
- CTS 'A' 10% audio taper spec
- Shaft Style/Trim type - Split knurl w/24 teeth/splines
- Split Knurl trim size - 0.370" / 9.4mm long x 0.236" / 5.99mm diameter
- Overall height: 28mm
- Pot base diameter: 16mm
- Pot base height: 8mm
- Threaded brass bushing length - 0.375" / 9.53mm
- Threaded brass bushing diameter - 0.370" / 9.4mm
CTS RoHS compliance certificate
CTS REACH certificate of compliance
Hate soldering your ground wires to the pot casing? Check out the Ground Bug!
Looking forward to installing your new pot, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do.
I have been stocking Ground Bugs for a while, and they really are the perfect match when replacing a pot as they further help you with your installs. I stock a Ground Bug specifically designed for use with the CTS 270 mini series pots - Click HERE to view the Ground Bug 'Mini Mite'
Ordering/shipping
Local pickup - If you are local and wish to collect any items or order in advance for collection on a specific day, then you can still place an order online and select local pickup at the checkout. Or drop me a message and I'll reserve the items ready for your visit.
For online ordering and dispatch - In stock, non made to order items are processed and dispatched 4 days a week; Monday, Tuesday, Wednesday & Friday.
For orders that are placed on a Monday, Tuesday, Wednesday & Friday I have an order cut off time of 14:00GMT (with Royal Mail shipping services only) to allow me chance to process, pack and dispatch your order same day.
For non dispatch days (Saturday, Sunday, & Thursday) there is no order cut-off time, and these will be processed, packed and shipped on the closest following dispatch day.
I will always endeavor to fulfill orders as quickly as I can and if you have specific requirements for a delivery date please do let me know and hopefully I can help.
If you have more queries regarding order placing, processing, fulfillment or general shipping then please see the FAQ page HERE
