Solderless Pre-Wired Guitar wiring harness | 5-way Stratocaster 'Modern' kit | Left handed w/RH taper pots
I have spent my guitar playing life around Stratocasters. I first become interested in them at the age of 5, seeing the likes of Hendrix, Clapton, SRV and Gilmour playing them on concert VHS tapes that my parents would put on whilst growing up. Although I was young, I soon noticed that all these people were playing the same type of guitar, and that really caught my eye. On my 6th birthday I asked for a guitar, and was incredibly lucky enough to have received a Squier Strat, and the Strat in general was pretty much all I played right up until my 30s. So needless to say, the Strat harness range is close to my heart and something I wanted to ensure is the best quality product I could offer to help bring out the best in your Strat too.
This is a further revision of my popular 'modern' Strat harness with the addition of solderless connections, meaning you can install this harness into your Strat without the need to touch a soldering iron. Which has a couple of benefits, perhaps if you're not particularly comfortable with soldering yet or maybe you plan on regularly swapping pickups, which this helps a great deal as it's a few screw connections and it's done.
I call this the the 'modern' simply as it is a revision over the vintage style strat wiring where the bridge pickup has no tone control. Instead, on this harness you have Tone 1 controlling the tone for the Neck & Middle pickup, and Tone 2 controlling the tone for the bridge pickup. Nice and simple really!
Left handed choices
Not sure whether Left Handed/Reverse audio taper pots are 'right' for you? Check out this article I put together addressing the subject, and hopefully it will help you find the correct choice for your playing. HERE
The Solderless system makes life an awful lot easier if you're perhaps not comfortable using a soldering iron or worried about damaging components etc. So the install is more straight forward, but care is still needed to to ensure it all works as it should and stands the test of time. I have written some handy install guides for the solderless harness kits, and that can be found over on the wiring diagrams & helpful info page here on the website as well as the 'wiring' diagram you'll need to follow for which of your wires attach to the relevant solderless connections.
The parts I use, in particular the pots, are CTS branded pots which are imperial measurements. If you're fitting this harness to a far east built variant for example such as a Squier or similar, then you may have to widen the holes in the control plate to accommodate for these imperial measurement pots. Or alternatively, purchase a new control plate that is already suited to the US spec components.
For reference, the CTS pots I use in this harness have a shaft diameter of 9.52mm.
You may also require new control knobs to fit the CTS pot 'split shaft' spline diameter of 5.95mm.
If you do require a US spec control plate or control knobs, we do carry a selection of popular options in stock and they can be viewed in the hardware & plastic hardware categories on the store.
Centre to centre measurements between components are -
Centre of Switch to volume pot - 48mm
Centre of volume pot to centre of tone pot 1 - 45mm
Centre of tone pot 1 to tone pot 2 - 45mm
These measurements for my templates were taken from a USA Fender Stratocaster pickguard.
- For RH taper - CTS '450' Series +/-10% Tolerance short shaft pots - 250k, split shaft pots as standard on Strat kits.
- .022uF 'Yellow Mustard' type tone capacitor
- Pure Tone multi contact jack socket
- CRL spring loaded 5 way lever switch
- Gavitt USA made cloth covered 22AWG wire
- 20AWG Tinned copper ground
- Soldered using Rapid 22SWG lead-free solder
- RS PRO solderless connectors
- For treble bleed option, I will use my Home of Tone Treble Bleed kit
This kit is made and ready to ship