{"product_id":"pre-wired-guitar-wiring-harness-jimi-stratocaster-kit-right-handed","title":"Pre-Wired Guitar wiring harness |  Jimi Stratocaster kit  | Right handed","description":"\u003cp\u003ePlease use the tabs below to read through the information about this Pre-Wired harness kit. From a run down of what the kit does, to important fitting information and full specs.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eOrder times\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eI usually make harnesses to order, due to the variety of spec options that could be chosen across the whole range. The current turnaround time for a harness orders is around 5-7 working days depending on quantity of orders in at the time and your order will be updated accordingly when it is dispatched. This turnaround time doesn't include the transit time. Thanks for your patience whilst I get your harness made!\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003e\u003ci\u003eModel Description\u003c\/i\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003eI have spent my guitar playing life around Stratocasters. I first become interested in them at the age of 5, seeing the likes of Hendrix, Clapton, SRV and Gilmour playing them on concert VHS tapes that my parents would put on whilst growing up. Although I was young, I soon noticed that all these people were playing the same type of guitar, and that really caught my eye. On my 6th birthday I asked for a guitar, and was incredibly lucky enough to have received a Squier Strat, and the Strat in general was pretty much all I played right up until my 30s. So needless to say, the Strat harness range is close to my heart and something I wanted to ensure is the best quality product I could offer to help bring out the best in your Strat too. \u003cbr\u003e\u003cbr\u003eThis kit is specifically for those looking to capture some Jimi Hendrix vibes! So if you are right handed, but have been wanting to create a Jimi inspired reversed Strat, then this is the kit for you.\u003cbr\u003eIt will suit a left handed Strat pickguard layout, but made with regular right handed audio taper pots. So you can recreate that flipped over Strat visual, but still have right handed pot functionality. \u003cbr\u003e\u003cbr\u003eAt it's core though it's a Hendrix era ('66\/67 to '70) Fender Strat specs, or you can 'modernise' it so to speak and have a 5 way switch. So here we have options for the true to vintage 3 way pickup selector, early spec cap value choices, and tone pot wiring configurations as well as a 5 way switch version of those vintage schematics and cap specs too. \u003cbr\u003e\u003cspan\u003eThrough this period though we still the neck pickup using one of the tone pots and the middle pickup using the other tone pot. The bridge pickup wasn't connected to a tone pot at all. The CBS era saw a transition to using plastic coated wire, but to be honest, in my premium replacement wiring kits I will be sticking with quality Gavitt USA cloth covered wire. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFor all of these kits, regardless of specs chosen, I will be using as standard, CRL premium blade switches, CTS 450 series pots, 'Mustard' tone capacitors, Gavitt USA wire and the quality Pure Tone multi contact jack socket. These are tried and tested components and will get the best from your pickups for years to come. The main detail with the choices\/options are the specs to suit the era\/period of strat you're recreating. Schematic will be based upon the traditional method used for the period, which remained unchanged throughout. \u003cbr\u003e\u003cbr\u003ePlease note - This kit will not fit a regular right handed Strat pickguard. It is specifically made to suit a 'flipped\/converted' left handed Strat pickguard. For example, right handed guitarists wanting to create a Jimi style flipped over Strat project, using a left handed Strat, and flipping it over. If you have a regular right handed Strat, not flipped, but want the Jimi spec wiring style, \u003ca href=\"https:\/\/www.homeoftone.co.uk\/products\/pre-wired-guitar-wiring-harness-vintage-stratocaster-kit-right-handed?variant=43577756418303\" rel=\"noopener\" target=\"_blank\"\u003eplease see this kit instead.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eHow the controls and pots work\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMaster Volume control\u003cbr\u003eTone 1 - Neck pickup adjustment only\u003cbr\u003eTone 2 - Middle pickup adjustment\u003c\/p\u003e\n\u003cp\u003eSwitching\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(3 way)\u003c\/em\u003e\u003cbr\u003ePosition 1 - Bridge pickup with volume adjustment only\u003cbr\u003ePosition 3 - Middle pickup with volume and tone adjustment\u003cbr\u003ePosition 5 - Neck pickup with volume and tone adjustment\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSwitching (5 way)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePosition 1 - Bridge pickup with volume adjustment only\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePosition 2 - Bridge pickup with middle pickup in parallel with volume and tone adjustment\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePosition 3 - Middle pickup with volume and tone adjustment\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePosition 4 - Middle pickup with neck pickup in parallel with volume and tone adjustment\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePosition 5 - Neck pickup with volume and tone adjustment\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003eIn the next tab you'll see a break down of the options available for this kit, and what they mean.\u003cbr\u003e\u003cbr\u003e\u003cem\u003ePlease note, website example photo(s) may differ visually from the wiring kit you receive. This could be for a number of reasons but ultimately, don't be alarmed if you do spot visual differences between the stock photo and your supplied kit.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eProduct Options\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSwitch\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eFrom '54 to '77 Fender only offered 3 way pickup selector switches on their Stratocaster model from the factory, these were of course often modified with players modding or wedging things in the switch to give them those in-between tones and installing 5 way switches when they became available later on too. But to be true to vintage here, you can still choose the 3 way switch and there is an option for 5 way should you want a little more modern functionality\u003cbr\u003e\u003cem\u003ePickup selector switch type - \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eCRL 3 way blade switch (3 way used on production Strats from 54-77)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCRL 5 way blade switch\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eCapacitor value\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eCapacitor values used in production strats have changed a few times over the years, earlier models using the darker 0.1mfd cap value, through to later models seeing a 0.05mfd value used. \u003cbr\u003eThe 0.1mfd was used from '54 models right through the Pre-CBS era on both maple and rosewood neck instruments, into what I believe to be 1968. So if you want to recreate a Strat from earlier in Hendrix's all too short career, 0.1mfd will help achieve that.\u003cbr\u003eThe late '68 and '69 guitars onwards right through the 70's, I have seen the transition to using the 0.05uF(0.047uF) cap values as standard.\u003cbr\u003e\u003cem\u003eTone capacitor spec - \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003e0.1mfd (Used on production Stratocasters from '54 to around '68)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e0.05mfd (Used on production Stratocasters from around '68 onwards)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eWiring diagram and wiring info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003ePre-Wired kit general fitting guide - \u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Full_Install_Guide_PDF_2023.pdf?v=1692189523\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring Diagram \u003cbr\u003e3 way spec - \u003cbr\u003e\u003ca rel=\"noopener\" title=\"Tom Delonge Strat wiring diagram\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Delonge_Stratocaster_65bb4c59-b6a6-4fb1-acca-b637c0781b75.pdf?v=1699365343\" target=\"_blank\"\u003e\u003c\/a\u003e5 way spec - \u003cbr\u003eJack socket wiring guide - \u003ca rel=\"noopener\" href=\"https:\/\/www.homeoftone.co.uk\/blogs\/news\/how-to-guide-wiring-your-guitars-jack-mono-socket\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eSoldering ground wires to pot casings - \u003ca rel=\"noopener\" href=\"https:\/\/www.youtube.com\/watch?v=PB9y3sEXhsU\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring FAQs - \u003ca rel=\"noopener\" href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFitting information\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI have intended for my wiring harnesses to be as simple as possible to install to your Stratocaster, b\u003c\/span\u003e\u003cspan\u003eut in this section you'll find some important fitting notes that will hopefully help you assess whether the kit is suitable for your exact Strat or what is required to allow it to fit correctly.\u003cbr\u003e\u003cbr\u003ePlease note - This kit will not fit a regular right handed Strat pickguard. It is specifically made to suit a 'flipped\/converted' left handed Strat pickguard. For example, right handed guitarists wanting to create a Jimi style flipped over Strat project, using a left handed Strat, and flipping it over. If you have a regular right handed Strat, not flipped, but want the Jimi spec wiring style, \u003ca href=\"https:\/\/www.homeoftone.co.uk\/products\/pre-wired-guitar-wiring-harness-vintage-stratocaster-kit-right-handed?variant=43577756418303\" rel=\"noopener\" target=\"_blank\"\u003eplease see this kit instead.\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eCan I fit this kit myself?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eThis ultimately comes down to whether you own the equipment needed to correctly and safely install the kit, or how comfortable you feel working on your own guitar. I do feel that installing a pre-wired guitar harness is do-able for many guitarists but only if the correct tools are used and care is taken to ensure you do not damage the kit, your guitar or yourself! There are detailed \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/harness-fitting-guide\" target=\"_blank\"\u003einstallation guides\u003c\/a\u003e here on my website, as well as simple to follow wiring diagrams all to help make the process as easy as possible and in my experience, these have helped thousands of my customers carry out their own install. But if for any reason you have concerns about fitting the kit yourself which is entirely understandable, then I'm sure you'll agree that it is likely best to have a professional fit the kit and help ensure your purchased kit, and your beloved guitar are both looked after and worked on correctly. \u003cbr\u003eIf you are local to me (Stourbridge, West Midlands) I take on guitar work no problem at all so will certainly be able to help install your Signature Series harness. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWill the pots\/jack fit my pickguard and jack plate?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eThe components I use in my Signature Series wiring kits are for the most part, USA imperial specification. If you're fitting this harness to a far east built guitar such as a Squier or similar brand, then you may have to widen the holes in the pickguard to accommodate for these imperial measurement pots. Or alternatively, purchase a new pickguard that is already suited to the US spec components. The CTS pots and Pure Tone multi contact jack have a mounting thread shaft diameter of 0.369\" \/ 9.38mm so I recommend for ease of install a pickguard and\/or jackplate with 0.394\" \/ 10mm pot\/jack mounting holes. You can easily widen the holes in the Pickguard too if you would prefer, I recommend doing this safely with a step cutter drill bit. I also offer this as a service so if you would like me to widen your plate for you, do please get in touch and we can organise this additionally.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003eIf you’re buying this kit for a USA or Mexican made Strat, then chances are it will be a direct, no modifications install process for you. \u003cbr\u003e\u003cbr\u003e\u003cspan\u003eCentre to centre measurements between components are - \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCentre of Switch to volume pot - 48mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCentre of volume pot to centre of tone pot 1 - 45mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCentre of tone pot 1 to tone pot 2 - 45mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThese measurements for my mounting boards\/templates were taken from a USA Fender Stratocaster pickguard. Yours may vary from these measurements. If it is a minimal difference, then don’t worry. I allow for some ‘wiggle’ room in the wire lengths between components to help the product fit a wide variety of models. If the measurements are drastically different to these, then please get in touch with your centre to centre measurements and I will adjust to suit your instrument more closely. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWhat control knobs will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eThe kit uses CTS Split shaft pots which have a adjustable split shaft diameter of 5.95mm w\/ 24 splines. You will need control knobs that suit these measurements.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDo not attempt to force fit smaller, metric\/import spec control knobs onto the imperial USA spec pots, doing this can damage the pot.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you do require a US spec control knobs, I do carry a selection of popular options in stock and they can be viewed in the \u003c\/span\u003e\u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" title=\"Guitar control knobs\" target=\"_blank\"\u003eControl Knob category\u003c\/a\u003e\u003cspan\u003e on the store.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhich switch tip will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eMuch like with the control knobs, the CRL switch used in this kit is USA spec, with imperial sizes. Therefore you need a switch tip which will fit a CRL switch, which measures 0.185\" \/ 4.72mm\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you do require a US spec switch tip, I do carry a selection of popular options in stock and they can be viewed in the \u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" target=\"_blank\"\u003eSwitch Tips\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" target=\"_blank\"\u003e category\u003c\/a\u003e\u003cspan\u003e on the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\/Parts included\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e- 3x CTS '450' Series +\/-10% Tolerance short shaft pots - 250k split shaft\u003cbr\u003e- 1x 'Yellow Mustard' type tone capacitor (.1mfd or .05mfd)\u003cbr\u003e- 1x Pure Tone multi contact jack socket (nickel finish)\u003cbr\u003e- 1x CRL spring loaded 3 or 5 way lever switch\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e- 1x Keystone Electronics 7313 connection terminal lug washer #8\u003cbr\u003e- Gavitt USA made cloth covered 22AWG wire\u003cbr\u003e- 20AWG Tinned copper ground\u003cbr\u003e- Soldered using R-Tech Premium Lead-Free (Sn95.5Ag3.9Cu0.6) 22swg Solder wire \u003cbr\u003e\u003cbr\u003eRoHS Compliant components are used throughout pre-wired assemblies. All components used in this assembly are being used for their intended purposes stated in the guidelines by their relevant manufacturer. Any use outside of stated or recommended guidelines is entirely up to the customer, but sales support\/warranty\/refunds are then extinguished. For a run down of the manufacturers and product data sheets you can click \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/pre-wired-assembly-component-data-and-reference-sheets\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note - wiring kit does not include new control knobs\/switch tip\/control plate etc but does include the pot\/jack mounting nuts and washers and switch mounting screws. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eWhy these spec parts over others available?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eSimply put, component choice has been one of the most important parts of my product development. I have worked on guitars for many years, and built these kits professionally since 2015, and as a result have been able to see and experience working on the majority of components available on the market. In my findings, A\/B testing and more, I have found the components I decided on for my Signature Series to be the most reliable, best tolerance and great functioning parts to use to help customers get the most out of their instruments. I use CTS '450' series premium spec pots as they have a tight tolerance, and will consistently provide me with accurate value, as well as very solid build quality. I use trusty 'Mustard' style polyester film 'tone' capacitors as in my opinion they simply can't be beat for great value, solid construction, solid lead-outs, super tight tolerances and reliable tone\/function. I would personally much rather use a trusty Mustard for example over something like a paper in oil, as from experience that are so much more reliable to use. This is from carrying out a lot of A\/B testing, both tonally, as well as armed with the multi-meter for testing values and actual tolerances, as well as handling them to test construction quality for long lasting reliability in use. I use the brilliant 'Pure Tone' Multi Contact Jack sockets as they are incredibly reliable, due to their additional contact points for both tip and sleeve. I use CRL, Oak and Switchcraft brand switches across the range as these are built very well, with care will last for many years to come and have long since provided me with reliable use professionally. All kits are wired up with quality USA made Gavitt wire, it's great to work with, super consistent gauge and provides me with a very reliable quality item for my kits. I totally understand that with anything guitar, it is subjective, but I have, with an open mind, thoroughly tested a broad variety of components over the years and these have all become the items I trust to use every day. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eHarness FAQ's\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI've been proudly making, developing and installing my pre-wired guitar harnesses since the beginning of the Home of Tone back in 2015 (time flies when you're having fun right!). Although I feel I do my best in covering as much information as possible across the various product listings, fitting guides, wiring diagrams and more, I thought it might be helpful to put together an FAQ's page that covers some of the general additional questions I get asked. You can view these Harness FAQ's \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003e'Ground Bug' deal!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eLooking forward to installing your new wiring, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard\/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do. \u003cbr\u003eI have been stocking Ground Bugs for a while, and they really are the perfect match for a pre-wired harness as they further help you with your installs. So I have set up a 10% off Ground Bug deals when purchased with a Home of Tone Signature Series pre-wired harness. This is an automatic discount code, so all you need to have is a Signature Series kit, and a Ground bug in your cart, and the discount will automatically be applied to the bug for you! \u003ca title=\"Ground Bug - Guitar pot soldering washer\" href=\"https:\/\/www.homeoftone.co.uk\/collections\/shielding-misc-wiring-parts\/products\/swannell-guitars-ground-bug-ground-lug-pot-washer?variant=44137818194175\" target=\"_blank\"\u003eClick HERE to view the Ground Bug listing\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDo you make custom harnesses?\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI'm afraid I do not offer a custom harness service. Only kits developed, tested and listed on my website are the available kits. So no custom schematics etc. If you happen to be local to my office, then I do carry out custom work in house, but in regards to shipped out pre-wired harnesses I do not offer custom kits. I am however happy to use different pot values or cap values within reason if you have a specific requirement that differs to the specs listed above. If this is relevant to yourself then please get in touch to discuss further to ensure the request is possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eGPSR \u0026amp; Safety info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eManufacturer: \u003c\/b\u003eJames' Home of Tone, Laburnum Street, Stourbridge, DY8 4NX, UK.\u003cbr\u003eEmail: james@homeoftone.co.uk\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eEU Authorised Representative:\u003c\/b\u003e Global Trade Department (NI) Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast, BT9 6AG, Northern Ireland. Email: \u003ca href=\"mailto:contact@globaltradedept.com\" target=\"_blank\"\u003econtact@globaltradedept.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIntended user: \u003c\/strong\u003eThe Signature Series pre-wired electric guitar and electric bass guitar harnesses are only intended to be used by an adult (over the age of 18). By a guitar repair professional, or someone with sufficient repair\/modification experience.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIntended use: \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003eThe Signature Series pre-wired electric guitar and electric bass guitar harness is a replacement and\/or upgraded pre-wired harness kit that you can use to replace, retrofit or upgrade the volume, tone and pickup selection controls in an electric guitar or electric bass guitar. The Signature Series pre-wired electric guitar and electric bass guitar harness kit offers a quality, pre-assembled harness solution for your electric guitar or electric bass guitar model. Your existing guitar pickups can be installed to this pre-wired harness kit, to allow a factory equivalent or alternative control layout for your electric guitar or electric bass guitar as desired.\u003cbr\u003e\u003cbr\u003eFull installation guidance can be found on each specific kits product listing, with detailed fitting notes and requirements along with links to the specific wiring diagram. Before starting any install, the full guides must be read to ensure a safe install process throughout. James' Home of Tone cannot and will not be held liable for any injury or damage caused by incorrect methods, handling and techniques whilst installing a Signature Series pre-wired kit. Professional installation only recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Signature Series Pre-Wired electric guitar harness is intended to be used for:\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan\u003e▪ The specific model of guitar or bass that is detailed in the product description\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e▪ A like-for-like replacement or upgrade retrofit for your guitar or basses existing volume, tone and pickup selection controls\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e▪ Adjusting the pickup selection, volume and tone where applicable on an amplified electric guitar during use\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Signature Series Pre-Wired electric guitar harness is not intended to be used:\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e▪ In a guitar or bass model that it is not specifically designed and advertised for\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e▪ where modifications to the kit, its schematic or its components are carried out\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"James' Home of Tone","offers":[{"title":"3 Way (As used on production Strats from 54-77) \/ 0.1mfd ('67)","offer_id":58006969549182,"sku":"SIG-STR-JIMI-RH-001","price":72.99,"currency_code":"GBP","in_stock":true},{"title":"3 Way (As used on production Strats from 54-77) \/ 0.05mfd ('68 onwards)","offer_id":58006969581950,"sku":"SIG-STR-JIMI-RH-002","price":72.99,"currency_code":"GBP","in_stock":true},{"title":"5 Way (As used on production Strats from 77 onwards) \/ 0.1mfd ('67)","offer_id":58006969614718,"sku":"SIG-STR-JIMI-RH-003","price":72.99,"currency_code":"GBP","in_stock":true},{"title":"5 Way (As used on production Strats from 77 onwards) \/ 0.05mfd ('68 onwards)","offer_id":58006969647486,"sku":"SIG-STR-JIMI-RH-004","price":72.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Home_of_Tone_Signature_Series_left_handed_HSS_Strat_wiring_harness_loom_kit.jpg?v=1788340474","url":"https:\/\/www.homeoftone.co.uk\/products\/pre-wired-guitar-wiring-harness-jimi-stratocaster-kit-right-handed","provider":"Home of Tone Ltd","version":"1.0","type":"link"}