{"product_id":"pre-wired-guitar-wiring-harness-full-jazzmaster-kit-swiss-army-mod-right-handed","title":"Pre-Wired Guitar wiring harness | Full Jazzmaster kit Multi-Master mod | Right Handed","description":"\u003cp\u003ePlease use the tabs below to read through the information about this Pre-Wired harness kit. From a run down of what the kit does, to important fitting information and full specs.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eOrder times\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI usually make harnesses to order, due to the variety of spec options that could be chosen across the whole range. The current \u003c\/span\u003e\u003cspan\u003eturnaround time for\u003c\/span\u003e\u003cspan\u003e a Jazzmaster harness order is around 5-7 working days depending on quantity of orders in at the time and your order will be updated accordingly when it is dispatched. This turnaround time doesn't include the transit time. Thanks for your patience whilst I get your harness made!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003eModel Description\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eIt's no secret that I love Jazzmasters. From the comfort of the offset body shape, to the intuitive vibrato and ultimately, the sound. So this harness was definitely driven by the passion I have for pushing the traditional spec further.\u003c\/p\u003e\n\u003cp\u003eOver the years, my Series-Mod kit has been one of the most popular jazzmaster specs I offer. This furthers the idea, providing even more usable options available to you, hence the ‘Multi-Master’ name.\u003c\/p\u003e\n\u003cp\u003eThis kit is a mash up of a few different specs, starting with the series mod. In the lead circuit, the tone pot is a push\/pull pot that switches your neck and bridge pickups to series, for a boost in output and overall fatter, humbucker-like tone! Regardless of whether you are in the rhythm circuit, or in the lead circuit, you can switch to series mode providing you with the two pickups in series in both rhythm and lead circuits for two different sounds. It also overrides whichever pickup position you are in, so you don’t have to mess about switching the toggle switch to the middle position and then have to engage the push\/pull, keeping it quick and simple. \u003c\/p\u003e\n\u003cp\u003eNext up, this kit incorporates the superb ‘pickup select rhythm’ specs too from another of my popular kits. To me, this spec is an absolute no brainer for a Jazzmaster. It really opens up the tonal options for your rhythm circuit, by allowing you to switch between neck, neck and bridge, and bridge too! Traditionally wired Jazzmasters only feature the neck pickup on it’s own in the rhythm circuit, so being able to hear that unique sound in the middle and bridge positions too improves the overall Jazzmaster tonal experience for sure.\u003c\/p\u003e\n\u003cp\u003eFinally! I offer this kit with the option of a traditional spec rhythm circuit, so a 1MEG volume, 50kOhm tone and a .022mfd capacitor, for those vintage correct rhythm circuit tones (albeit with the added ability to switch pickups and have them in series too). I also offer it with my ‘Bright Switch’ spec rhythm circuit, where it’s equipped with 1MEG for both volume and tone, and a .033mfd capacitor. I opted to offer this spec primarily as it has been a common request to make my series mod kit with 1MEG pots, so now this is available here, but also as it may be useful if you primarily like warmer JM tones but would like the access to bright JM tones from time to time so having that spec nestled up in the rhythm circuit is helpful.\u003c\/p\u003e\n\u003cp\u003eThere are a couple of things to note though, specifically in regards to the pot specs. I much, much prefer the CTS 450 series push\/pull pots over any other push\/pull pot on the market Their construction quality and reliability, in my opinion, is far and above the others, so I only want to use those in this kit, but sadly no one yet commissions those to be made in 1MEG. \u003cbr\u003eSo, offer this kit with a few options with that in mind. So please note, this spec kit isn’t available with the traditional Jazzmaster 1MEG volume AND tone lead circuit pots. However, if you really prefer the traditional, brighter 1MEG Jazzmaster lead circuit specs, then I offer it with a 1MEG volume pot, but it will have a 500k tone pot. The difference will be subtle, but it's worth keeping this in mind.\u003cbr\u003eAlternatively, if the bright Jazzmaster sound isn't for you, then you can choose 500k pots, or even 250k if you're looking for an all round warmer response. \u003c\/p\u003e\n\u003ch5\u003eProduct options\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eLead circuit pot spec\u003c\/strong\u003e\u003cbr\u003eAs noted in the main model description section, due to the limitation of there being no available CTS 450 series push\/pull pot in 1MEG spec, it is worth reading through the pot specs to ensure your choice helps capture the overall sound you like.\u003cbr\u003e\u003cbr\u003eTraditionally, Jazzmasters are seen equipped with 1MEG lead circuit pots. If you want to retain as much of that bright, tonal character as possible, then I can make the kit with a 1MEG volume pot (choice of vintage spec linear taper, or audio tapers available) but with a 500k tone pot for the series push\/pull. For the most part, this will get you very close to the traditional 1MEG jazzmaster sound.\u003cbr\u003eA linear taper 1MEG pot was what Fender used on the original\/vintage Jazzmasters. In terms of how that responds, if you play primarily clean or with very minimal gain, and like your volume pot sweep to be spread further across the pot taper, then linear is a great choice for you. If you play with gain, or prefer a 'quicker' response from your volume pot, which can be helpful for quick pinky swells for example. Not needing to rotate the pot too far to get a noticable response, then an audio taper volume pot is great. \u003cbr\u003e\u003cbr\u003e500k pots will mostly capture the overall vibe of a Jazzmaster sound, but will tame the top end found in traditionally spec'd 1MEG Jazzmasters. If you find the Jazzmaster normally sounds too ice-pick bright, but would still like some of the Jazzmaster character, I would recommend the 500k spec for this particular kit. Audio taper is used as standard in the 500k pot spec\u003cbr\u003e\u003cbr\u003e250k pots will provide a warmer tone by comparison to the 500k pots, and for those that are chasing a notably warmer tone from their guitar, or have a set of pickups better suited to this pot spec. Audio taper is used as standard in the 250kpot spec\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cem\u003eWith or without Treble Bleed?\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003eFirst up, what does it do? Without a 'treble bleed', when you roll down the volume pot it will naturally lose some of the treble frequencies through the sweep. A Treble Bleed kit takes the 'high' treble tone frequencies out of the circuit at the volume pot, and puts them back in the circuit as the signal leaves the volume pot. This means the treble frequencies are prevented from naturally bleeding out of the circuit as your turn your volume pot down. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. Some guitar players wouldn't be without a treble bleed, and many have never used one on their guitars. Truth is, it is very much personal preference. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you! For the standard spec, I use a ceramic 680pF capacitor with a carbon film 220kOhm resistor parallel wired.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eRhythm circuit pot specs\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eI offer this kit with the option of a traditional spec rhythm circuit, so a 1MEG volume, 50kOhm tone and a .022mfd capacitor, for those vintage correct rhythm circuit tones (albeit with the added ability to switch pickups and have them in series too). \u003cbr\u003e\u003cbr\u003eI also offer it with my ‘Bright Switch’ spec rhythm circuit, where it’s equipped with 1MEG for both volume and tone, and a .033mfd capacitor. I opted to offer this spec primarily as it has been a common request to make my series mod kit with 1MEG pots, so now this is available here, but also as it may be useful if you primarily like warmer JM tones but would like the access to bright JM tones from time to time so having that spec nestled up in the rhythm circuit is helpful. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eWiring diagram and wiring info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003ePre-Wired kit general fitting guide - \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Full_Install_Guide_PDF_2023.pdf?v=1692189523\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring Diagram - \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/JM_Multi_Master_RH.pdf?v=1789416239\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eSoldering ground wires to pot casings - \u003ca href=\"https:\/\/www.youtube.com\/watch?v=PB9y3sEXhsU\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring FAQs - \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFitting information\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI have intended for my wiring harnesses to be as simple as possible to install to your Jazzmaster, but in this section you'll find some important fitting notes that will hopefully help you assess whether the kit is suitable for your exact JM or what is required to allow it to fit correctly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs the push\/pull pot sits deeper than a standard pot, it may also be worth double checking the cavity depth in your specific Jazzmaster to ensure it will fit this deeper pot size. The CTS push\/pull pot measures 31mm, from pickguard edge to top of pot casing. Traditional Jazzmaster body cavities will accomodate for this, but it is certainly worth double checking yours prior to ordering\/installing. \u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eCan I fit this kit myself?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eThis ultimately comes down to whether you own the equipment needed to correctly and safely install the kit, or how comfortable you feel working on your own guitar. I do feel that installing a pre-wired guitar harness is do-able for many guitarists but only if the correct tools are used and care is taken to ensure you do not damage the kit, your guitar or yourself! There are detailed \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/harness-fitting-guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003einstallation guides\u003c\/a\u003e here on my website, as well as simple to follow wiring diagrams all to help make the process as easy as possible and in my experience, these have helped thousands of my customers carry out their own install. But if for any reason you have concerns about fitting the kit yourself which is entirely understandable, then I'm sure you'll agree that it is likely best to have a professional fit the kit and help ensure your purchased kit, and your beloved guitar are both looked after and worked on correctly. \u003cbr\u003eIf you are local to me (Stourbridge, West Midlands) I take on guitar work no problem at all so will certainly be able to help install your Signature Series harness. \u003cbr\u003e\u003cbr\u003eI would also note here, that soldering the pickup wires onto the tighter push\/pull pot might be tricky for some installers. If you are well acquainted with a soldering iron, you'll sail it I'm sure, but if you a new to soldering, I would perhaps recommend having a trusted local tech install this kit for you to ensure no damage is caused to the components and it all functions correctly.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWill the pots\/jack fit my pickguard and jack plate?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eThe components I use in my Signature Series wiring kits are for the most part, USA imperial specification, and will be a direct replacement for a genuine USA or Mexico made Fender Jazzmaster. If you're fitting this harness to different model\/spec of Jazzmaster, or a far east built guitar such as a Squier or similar brand, then you may have to widen the holes in the pickguard to accommodate for these imperial measurement pots. The CTS pots and Pure Tone multi contact jack have a mounting thread shaft diameter of 0.369\" \/ 9.38mm so I recommend for ease of install a pickguard and\/or jackplate with 0.394\" \/ 10mm pot\/jack mounting holes. You can easily widen the holes in the Pickguard too if you would prefer, I recommend doing this safely with a step cutter drill bit. I also offer this as a service so if you would like me to widen your plate for you, do please get in touch and we can organise this additionally.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWhat control knobs will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eThe kit uses CTS Split shaft pots. Split shaft pots have a adjustable split shaft diameter of 5.95mm w\/ 24 splines. You will need control knobs that push-fit and suit these measurements. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDo not attempt to force fit smaller, metric\/import spec control knobs onto the imperial USA spec pots, doing this can damage the pot.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you do require a US spec control knobs, I do carry a selection of popular options in stock and they can be viewed in the \u003c\/span\u003e\u003ca title=\"Guitar control knobs\" href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eControl Knob category\u003c\/a\u003e\u003cspan\u003e on the store.\u003cbr\u003e\u003cbr\u003eWant to use 1\/4\" solid shaft style control knobs? No problem, you can simply install some \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\/products\/brass-pot-sleeves-convert-to-solid-shaft\" target=\"_blank\"\u003ebrass conversion sleeves\u003c\/a\u003e onto the split shaft pots and you'll then be able to do so. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe harness does come supplied with the roller wheel control knobs pre fitted on the rhythm circuit controls for you. Those secure to the pot shaft with a grub screw.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhich switch tip will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eMuch like with the control knobs, the Switchcraft pickup selector in this kit is USA spec, with imperial thread sizes. Therefore you need a imperial thread switch toggle tip to suit Switchcraft toggles.\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you do require a US spec switch tip, I do carry a selection of popular options in stock and they can be viewed in the \u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSwitch Tips\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e category\u003c\/a\u003e\u003cspan\u003e on the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eSpecs\/Parts included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e- Choice of lead circuit pot values\/specs:\u003cbr\u003e2x CTS 450 Series 250k (volume and push\/pull tone)\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e2x CTS 450 Series 500k (volume and push\/pull tone)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1x .022uF or .033uF Mustard tone capacitor in the lead circuit\u003cbr\u003e\u003c\/span\u003e- 1x .\u003cspan\u003e022uF 'Yellow Mustard' type tone capacitor in the rhythm circuit\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1x Switchcraft right angle 3 way toggle switch\u003cbr\u003e\u003c\/span\u003e- 1x Switchcraft 2 position DPDT slide switch\u003cbr\u003e- 1x Right angle rhythm circuit mounting bracket\u003cbr\u003e- 2x Roller wheel control knobs for ryhytm circuit\u003cbr\u003e- 1x CTS 1MEG Lin mini pot\u003cbr\u003e- 1x CTS 50k Lin mini pot\u003cbr\u003e\u003cspan\u003e- 1x Pure Tone multi contact jack socket\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Gavitt USA made cloth covered 22AWG wire\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 20AWG Tinned copper ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Soldered using R-Tech Premium Lead-Free (Sn95.5Ag3.9Cu0.6) 22swg Solder wire \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eRoHS Compliant\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRoHS Compliant components are used throughout pre-wired assemblies. All components used in this assembly are being used for their intended purposes stated in the guidelines by their relevant manufacturer. Any use outside of stated or recommended guidelines is entirely up to the customer, but sales support\/warranty\/refunds are then extinguished. For a run down of the manufacturers and product data sheets you can click \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.homeoftone.co.uk\/pages\/pre-wired-assembly-component-data-and-reference-sheets\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note - wiring kit does not include new lead circuit control knobs\/switch tip etc but does include the switch\/pot\/jack mounting nuts, washers \u0026amp; screws and does include the rhythm circuit roller wheels. Please see above spec\/item list for full detailed run down of what is included or drop me a message if you aren't 100% sure.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eWhy these spec parts over others available?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eSimply put, component choice has been one of the most important parts of my product development. I have worked on guitars for many years, and built these kits professionally since 2015, and as a result have been able to see and experience working on the majority of components available on the market. In my findings, A\/B testing and more, I have found the components I decided on for my Signature Series to be the most reliable, best tolerance and great functioning parts to use to help customers get the most out of their instruments. I use CTS '450' series premium spec pots as they have a tight tolerance, and will consistently provide me with accurate value, as well as very solid build quality. I use trusty 'Mustard' style polyester film 'tone' capacitors as in my opinion they simply can't be beat for great value, solid construction, solid lead-outs, super tight tolerances and reliable tone\/function. I would personally much rather use a trusty Mustard for example over something like a paper in oil, as from experience that are so much more reliable to use. This is from carrying out a lot of A\/B testing, both tonally, as well as armed with the multi-meter for testing values and actual tolerances, as well as handling them to test construction quality for long lasting reliability in use. I use the brilliant 'Pure Tone' Multi Contact Jack sockets as they are incredibly reliable, due to their additional contact points for both tip and sleeve. I use CRL, Oak and Switchcraft brand switches across the range as these are built very well, with care will last for many years to come and have long since provided me with reliable use professionally. All kits are wired up with quality USA made Gavitt wire, it's great to work with, super consistent gauge and provides me with a very reliable quality item for my kits. I totally understand that with anything guitar, it is subjective, but I have, with an open mind, thoroughly tested a broad variety of components over the years and these have all become the items I trust to use every day. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eHarness FAQ's\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI've been proudly making, developing and installing my pre-wired guitar harnesses since the beginning of the Home of Tone back in 2015 (time flies when you're having fun right!). Although I feel I do my best in covering as much information as possible across the various product listings, fitting guides, wiring diagrams and more, I thought it might be helpful to put together an FAQ's page that covers some of the general additional questions I get asked. You can view these Harness FAQ's \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003e'Ground Bug' deal!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eLooking forward to installing your new wiring, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard\/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do. \u003cbr\u003eI have been stocking Ground Bugs for a while, and they really are the perfect match for a pre-wired harness as they further help you with your installs. So I have set up a 10% off Ground Bug deals when purchased with a Home of Tone Signature Series pre-wired harness. This is an automatic discount code, so all you need to have is a Signature Series kit, and a Ground bug in your cart, and the discount will automatically be applied to the bug for you! \u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/ground-bugs\/products\/swannell-guitars-daddy-long-legs-ground-bug-ground-lug-pot-washer\" title=\"Ground Bug - Guitar pot soldering washer\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eClick HERE to view the Ground Bug listing\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDo you make custom harnesses?\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI'm afraid I do not offer a custom harness service. Only kits developed, tested and listed on my website are the available kits. So no custom schematics etc. If you happen to be local to my office, then I do carry out custom work in house, but in regards to shipped out pre-wired harnesses I do not offer custom kits. I am however happy to use different pot values or cap values within reason if you have a specific requirement that differs to the specs listed above. If this is relevant to yourself then please get in touch to discuss further to ensure the request is possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eGPSR \u0026amp; Safety info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eManufacturer: \u003c\/b\u003eJames' Home of Tone, Laburnum Street, Stourbridge, DY8 4NX, UK.\u003cbr\u003eEmail: james@homeoftone.co.uk\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eEU Authorised Representative:\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGlobal Trade Department NI, Office 834, 92 Castle Street, Belfast, BT1 1HE, Northern Ireland. Email: Contact@GlobalTradeDept.com\u003c\/span\u003e\u003c\/p\u003e","brand":"James' Home of Tone","offers":[{"title":"1MEG Linear taper volume 500k audio push\/pull tone \/ Without treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":58026384556414,"sku":"SIG-JM-SW-RH-001","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Linear taper volume 500k audio push\/pull tone \/ Without treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":58026384621950,"sku":"SIG-JM-SW-RH-002","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Linear taper volume 500k audio push\/pull tone \/ With treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":58026384589182,"sku":"SIG-JM-SW-RH-003","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Linear taper volume 500k audio push\/pull tone \/ With treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":58026384654718,"sku":"SIG-JM-SW-RH-004","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Audio taper volume 500k audio push\/pull tone \/ Without treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":58026384687486,"sku":"SIG-JM-SW-RH-005","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Audio taper volume 500k audio push\/pull tone \/ Without treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":58026384753022,"sku":"SIG-JM-SW-RH-006","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Audio taper volume 500k audio push\/pull tone \/ With treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":58026384720254,"sku":"SIG-JM-SW-RH-007","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"1MEG Audio taper volume 500k audio push\/pull tone \/ With treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":58026384785790,"sku":"SIG-JM-SW-RH-008","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"500k Audio taper (volume \u0026 tone) \/ Without treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":57840120168830,"sku":"SIG-JM-SW-RH-010","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"500k Audio taper (volume \u0026 tone) \/ Without treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":57840120234366,"sku":"SIG-JM-SW-RH-011","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"500k Audio taper (volume \u0026 tone) \/ With treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":57840120201598,"sku":"SIG-JM-SW-RH-012","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"500k Audio taper (volume \u0026 tone) \/ With treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":57840120267134,"sku":"SIG-JM-SW-RH-013","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"250k Audio taper (volume \u0026 tone) \/ Without treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":57840120299902,"sku":"SIG-JM-SW-RH-014","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"250k Audio taper (volume \u0026 tone) \/ Without treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":57840120365438,"sku":"SIG-JM-SW-RH-015","price":134.99,"currency_code":"GBP","in_stock":true},{"title":"250k Audio taper (volume \u0026 tone) \/ With treble bleed \/ Traditional style - 1MEG\/50k\/.022mfd","offer_id":57840120332670,"sku":"SIG-JM-SW-RH-016","price":136.99,"currency_code":"GBP","in_stock":true},{"title":"250k Audio taper (volume \u0026 tone) \/ With treble bleed \/ Bright switch style - 1MEG\/1MEG\/.033mfd","offer_id":57840120398206,"sku":"SIG-JM-SW-RH-017","price":136.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Home_of_Tone_Signature_Series_Jazzmaster_Series_mod_pre-wired_harness_wiring_loom_1.png?v=1776096208","url":"https:\/\/www.homeoftone.co.uk\/products\/pre-wired-guitar-wiring-harness-full-jazzmaster-kit-swiss-army-mod-right-handed","provider":"Home of Tone Ltd","version":"1.0","type":"link"}