{"product_id":"pre-wired-guitar-wiring-harness-3-way-push-pull-series-mod-telecaster-kit-right-handed","title":"Pre-Wired Guitar wiring harness | 3-way Push\/Pull Series mod Telecaster kit | Right Handed","description":"\u003cp\u003ePlease use the tabs below to read through the information about this Pre-Wired harness kit. From a run down of what the kit does, to important fitting information and full specs.\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eOrder times\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003eI usually make harnesses to order, due to the variety of spec options that could be chosen across the whole range. The current turnaround time for a harness orders is around 5-7 working days depending on quantity of orders in at the time and your order will be updated accordingly when it is dispatched. This turnaround time doesn't include the transit time. Thanks for your patience whilst I get your harness made!\u003c\/p\u003e\n\u003ch5\u003e\u003cb\u003e\u003ci\u003eModel Description\u003c\/i\u003e\u003c\/b\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Telecaster is an iconic instrument, one that defined a brand, inspired so many musicians and set the bar for the solid body electric guitar moving forward. I want my Signature Series wiring harness for this legendary guitar to earn the right to be a small part of that through a choice of quality components and respect for it's design. \u003cbr\u003e\u003cbr\u003e4 way switching has been a popular mod on Telecasters for years, but for some players, the 4 way switch just isn't intuitive, with those players preferring the functionalty and feel of a simple 3 way switch. However, the series position is a fun one! Chunky tones, a boost in output, it can be a useful extra sound to have. So the best solution for this is to have the series mod on a push\/pull pot instead. With the push\/pull pot 'down', you have regular 3 way tele functionality. Then regardless of what position you're in, just pull on the push\/pull pot and engage the series mod, with both pickups together in series. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eProduct Options\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePot shaft type\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003eThe first drop down option is the choice of split shaft or split shaft with a solid shaft conversion sleeve pre-installed for you. The CTS 450 series push\/pull pot only comes with a split shaft spec, which is fine of course if you plan to fit push-fit style 24 fine knurl spline control knobs. However, traditionally telecasters have solid shaft pots. So I have added the option for the push\/pull pot to have a solid shaft conversion sleeve installed for you, so you can use US spec 1\/4\" diameter solid shaft suited control knobs. If you select to have the conversion sleeve, then I will use a solid shaft pot in the volume position. If you choose the split shaft spec, I will use a split shaft pot for the volume position.\u003cbr\u003e\u003cbr\u003eIf you wish to fit a push-fit style control knob, you'll need the split shaft option and a control knob that will suit a CTS 5.95mm 24 spline split shaft pot.  OR if you intend to fit a grub screw secured control knob, they usually need a solid shaft pot so you choose the solid shaft option and install your grub screw fixed control knob on a 1\/4\" \/ 6.35mm solid shaft pot.\u003cstrong\u003e\u003cem\u003e\u003cbr\u003e\u003cbr\u003eTone capacitor value\u003cbr\u003e\u003c\/em\u003e\u003c\/strong\u003eI offer this pre-wired kit with a choice of tone capacitor. For many years (bulk of the 8+ years I've been making these for that matter) as standard I have installed 0.022mfd value tone caps to this kit. I opted for this as standard as I consider this a really versatile, 'modern' so to speak cap value choice and has served very well as a standard option over the years. In our trusty guitar player terms, I personally find the 0.022mfd equipped wiring by comparison to be clearer, and has served well. But I thought it might be useful to also offer the slightly more 'period correct' so to speak 0.05mfd cap value as an option too. \u003cbr\u003eSince Fender introduced this particular way of wiring their Telecasters in the late 60s, they've used 0.05mfd caps, and do still continued to do so on a number of models to this day. But must say a great deal of 'modern' production models have been featuring a 0.022mfd, with both Fender and many aftermarket pickup makers recommending it for optimal use too.\u003cbr\u003eWhich is right for you, may simply down to personal preference, but if you're not sure or not familiar with these specs understandbly, I would firstly recommend double checking the recommended specs by the pickup maker\/model you have in your Tele or plan to fit to your Tele. \u003cbr\u003eTo briefly summarise, the 0.05mfd by comparison to the 0.022mfd will have a subtly 'darker'\/warmer tone from full throughout the tone pot sweep, and if you A\/B'd the same guitar with the tone pot set at 0 between the 0.05mfd to the 0.022mfd it would be noticable darker. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eWith or without Treble Bleed?\u003c\/em\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cspan\u003eFirst up, what does it do? A Treble Bleed kit takes the 'high' treble tone frequencies out of the circuit at the volume pot, and puts them back in the circuit as the signal leaves the volume pot. This means the treble frequencies are prevented from naturally bleeding out of the circuit as your turn your volume pot down. The result is a smoothed out treble and a more uniform tone from 1 to 10. Reducing the treble drop out as the volume pot rolls off. Some guitar players wouldn't be without a treble bleed, and many have never used one on their guitars. Truth is, it is very much personal preference. If you like the idea of retaining treble as you roll your volume pot down, then a treble bleed is for you! As standard I use the .001uF \u0026amp; 120kOhm parallel wired treble bleed mod. \u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eWiring diagram and wiring info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003ePre-Wired kit general fitting guide - \u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Full_Install_Guide_PDF_2023.pdf?v=1692189523\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring Diagram - \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Tele_3_way_Series_push_pull_RH.pdf?v=1776939865\" rel=\"noopener\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eSoldering ground wires to pot casings - \u003ca rel=\"noopener\" href=\"https:\/\/www.youtube.com\/watch?v=PB9y3sEXhsU\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003eWiring FAQs - \u003ca rel=\"noopener\" href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFitting information\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI have intended for my wiring harnesses to be as simple as possible to install to your Telecaster, b\u003c\/span\u003e\u003cspan\u003eut in this section you'll find some important fitting notes that will hopefully help you assess whether the kit is suitable for your exact Tele or what is required to allow it to fit correctly.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eImportant note - \u003c\/strong\u003eA couple of the pickup connections upon install need to be made onto the CTS 450 series push\/pull pot's switch PCB, which is a little more fiddly than a regular lug. If you are not confident with this kind of soldering, I would recommend for you to have a professional guitar tech install the kit for you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eImportant note regarding wiring 4 way switching\u003c\/em\u003e\u003cbr\u003e\u003c\/strong\u003eFitting a series mod telecaster harness is a little different to a conventional 3 way harness, in that the neck pickup could need modifying depending on how it has been made by the pickup manufacturer. If it is a standard, two wire pickup, it requires an additional ground wire adding which allows for the series position and the small ‘jumper’ wire snipping\/removing. I have written a guide to do this \u003ca title=\"Prepping your Tele neck pickup for 4 way switching\" href=\"https:\/\/www.homeoftone.co.uk\/blogs\/news\/how-to-guide-what-do-i-need-to-do-to-my-tele-neck-pick-for-it-to-work-with-4-way-switching\" target=\"_blank\"\u003eHERE\u003c\/a\u003e but if you are at all unsure about doing this, I would highly recommend supporting your local trusted Tech to carry out the modification for you. This is also shown on the wiring diagram to follow, but please keep this in mind, correct grounding is essential for this schematic to work as it should.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eCan I fit this kit myself?\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003eThis ultimately comes down to whether you own the equipment needed to correctly and safely install the kit, or how comfortable you feel working on your own guitar. I do feel that installing a pre-wired guitar harness is do-able for many guitarists but only if the correct tools are used and care is taken to ensure you do not damage the kit, your guitar or yourself! There are detailed \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/harness-fitting-guide\" target=\"_blank\"\u003einstallation guides\u003c\/a\u003e here on my website, as well as simple to follow wiring diagrams all to help make the process as easy as possible and in my experience, these have helped thousands of my customers carry out their own install. But if for any reason you have concerns about fitting the kit yourself which is entirely understandable, then I'm sure you'll agree that it is likely best to have a professional fit the kit and help ensure your purchased kit, and your beloved guitar are both looked after and worked on correctly. \u003cbr\u003eIf you are local to me (Stourbridge, West Midlands) I take on guitar work no problem at all so will certainly be able to help install your Signature Series harness. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eWill the pots\/jack fit my control plate and jack plate?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eThe components I use in my Signature Series wiring kits are for the most part, USA imperial specification. If you're fitting this harness to a far east built guitar such as a Squier or similar brand, then you may have to widen the holes in the control plate to accommodate for these imperial measurement pots. Or alternatively, purchase a new control plate that is already suited to the US spec components. The CTS pots and Pure Tone multi contact jack have a mounting thread shaft diameter of 0.369\" \/ 9.38mm so I recommend for ease of install a control plate and\/or jackplate with 0.394\" \/ 10mm pot\/jack mounting holes. You can easily widen the holes in the control plate too if you would prefer, I recommend doing this safely with a step cutter drill bit. I also offer this as a service so if you would like me to widen your plate for you, do please get in touch and we can organise this additionally.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you’re buying this kit for a USA or Mexican made Tele, then chances are it will be a direct, no modifications install process for you. \u003cbr\u003e\u003c\/span\u003e\u003cbr\u003eCentre to centre measurements between components are - \u003cbr\u003eCentre of Switch to volume pot - 40mm\u003cbr\u003eCentre of volume pot to centre of tone pot - 64mm\u003cbr\u003eThese measurements for my templates were taken from a USA Fender telecaster control plate. \u003cspan\u003eThere is a small amount of 'give' in the wire lengths between the components, but if for any reason the measurements on your Telecaster are drastically different to those stated above, please do get in touch prior to ordering.\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhat control knobs will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eCTS Split shaft pots which have a adjustable split shaft diameter of 5.95mm w\/ 24 splines or CTS solid shaft pots which have a solid brass 0.25\" \/ 6.35mm shaft for mounting the control knob. You will need control knobs that suit these measurements.\u003cbr\u003eDo not attempt to force fit smaller, metric\/import spec control knobs onto the imperial USA spec pots, doing this can damage the pot.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIf you do require a US spec control knobs, I do carry a selection of popular options in stock and they can be viewed in the \u003c\/span\u003e\u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" title=\"Guitar control knobs\" target=\"_blank\"\u003eControl Knob category\u003c\/a\u003e\u003cspan\u003e on the store.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhich switch tip will fit?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cspan\u003eMuch like with the control knobs, the CRL switch used in this kit is USA spec, with imperial sizes. Therefore you need a switch tip which will fit a CRL switch, which measures 0.185\" \/ 4.72mm\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf you do require a US spec switch tip, I do carry a selection of popular options in stock and they can be viewed in the \u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" target=\"_blank\"\u003eSwitch Tips\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/www.homeoftone.co.uk\/collections\/control-knobs-switch-tips\" target=\"_blank\"\u003e category\u003c\/a\u003e\u003cspan\u003e on the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eWill the jack socket fit my mount cup\/plate?\u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003eMuch like with the control knob and plate fitting notes, this will ultimately come down to where your guitar was made and\/or what hardware it has already. The jack socket I use in this kit again is imperial specification, the outer thread diameter measures 0.367\" \/ 9.32mm and ideally requires a 0.394\" \/ 10mm hole to comfortably mount. If you have a threaded electrosocket style jack cup, you will need the imperial thread pitch version. The jack comes provided with washers and mounting nut \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecs\/Parts included\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e- 1x CTS '450' Series +\/-10% Tolerance audio taper short shaft pot - 250k\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e- 1x CTS '450' Series +\/-10% Tolerance audio taper short shaft push\/pull pot - 250k\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1x 'Yellow Mustard' type tone capacitor\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1x Pure Tone multi contact jack socket (nickel finish)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 1x CRL 3 way lever switch\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Gavitt USA made cloth covered 22AWG wire\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 20AWG Tinned copper ground\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- Soldered using R-Tech Premium Lead-Free (Sn95.5Ag3.9Cu0.6) 22swg Solder wire \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- For optional treble bleed - It will be a ceramic .001uF cap with a carbon film 120kOhm resistor parallel wired.\u003cbr\u003e\u003cbr\u003eRoHS Compliant components are used throughout pre-wired assemblies. All components used in this assembly are being used for their intended purposes stated in the guidelines by their relevant manufacturer. Any use outside of stated or recommended guidelines is entirely up to the customer, but sales support\/warranty\/refunds are then extinguished. For a run down of the manufacturers and product data sheets you can click \u003ca rel=\"noopener\" href=\"https:\/\/www.homeoftone.co.uk\/pages\/pre-wired-assembly-component-data-and-reference-sheets\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease note - wiring kit does not include new control knobs\/switch tip\/control plate etc but does include the pot\/jack mounting nuts and washers and switch mounting screws. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eWhy these spec parts over others available?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003eSimply put, component choice has been one of the most important parts of my product development. I have worked on guitars for many years, and built these kits professionally since 2015, and as a result have been able to see and experience working on the majority of components available on the market. In my findings, A\/B testing and more, I have found the components I decided on for my Signature Series to be the most reliable, best tolerance and great functioning parts to use to help customers get the most out of their instruments. I use CTS '450' series premium spec pots as they have a tight tolerance, and will consistently provide me with accurate value, as well as very solid build quality. I use trusty 'Mustard' style polyester film 'tone' capacitors as in my opinion they simply can't be beat for great value, solid construction, solid lead-outs, super tight tolerances and reliable tone\/function. I would personally much rather use a trusty Mustard for example over something like a paper in oil, as from experience that are so much more reliable to use. This is from carrying out a lot of A\/B testing, both tonally, as well as armed with the multi-meter for testing values and actual tolerances, as well as handling them to test construction quality for long lasting reliability in use. I use the brilliant 'Pure Tone' Multi Contact Jack sockets as they are incredibly reliable, due to their additional contact points for both tip and sleeve. I use CRL, Oak and Switchcraft brand switches across the range as these are built very well, with care will last for many years to come and have long since provided me with reliable use professionally. All kits are wired up with quality USA made Gavitt wire, it's great to work with, super consistent gauge and provides me with a very reliable quality item for my kits. I totally understand that with anything guitar, it is subjective, but I have, with an open mind, thoroughly tested a broad variety of components over the years and these have all become the items I trust to use every day. \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eHarness FAQ's\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI've been proudly making, developing and installing my pre-wired guitar harnesses since the beginning of the Home of Tone back in 2015 (time flies when you're having fun right!). Although I feel I do my best in covering as much information as possible across the various product listings, fitting guides, wiring diagrams and more, I thought it might be helpful to put together an FAQ's page that covers some of the general additional questions I get asked. You can view these Harness FAQ's \u003ca href=\"https:\/\/www.homeoftone.co.uk\/pages\/wiring-kit-faqs\" target=\"_blank\"\u003eHERE\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003e'Ground Bug' deal!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eLooking forward to installing your new wiring, but a little worried about making the ground connections to the pot casings? First time soldering and hear the horror stories of frying pots, or just simply want to neaten up your installs? Then the awesome 'Ground Bug' will help with any of these concerns, beginner or pro modders alike. The Ground Bug is a pot washer that fits between the pot casing and the pickguard\/body and has a number of lugs (much like with the main signal connections on the pot for example) to which you can very easily solder your ground wire connections too. Completely removing the worry and risk of soldering a pot casing, something I know many guitarists complain about having to learn to do. \u003cbr\u003eI have been stocking Ground Bugs for a while, and they really are the perfect match for a pre-wired harness as they further help you with your installs. So I have set up a 10% off Ground Bug deals when purchased with a Home of Tone Signature Series pre-wired harness. This is an automatic discount code, so all you need to have is a Signature Series kit, and a Ground bug in your cart, and the discount will automatically be applied to the bug for you! \u003ca rel=\"noopener\" title=\"Ground Bug - Guitar pot soldering washer\" href=\"https:\/\/www.homeoftone.co.uk\/collections\/ground-bugs\/products\/swannell-guitars-daddy-long-legs-ground-bug-ground-lug-pot-washer?variant=45159458799871\" target=\"_blank\"\u003eClick HERE to view the Ground Bug listing (We recommend the 'Daddy Long Legs' Ground Bug for tighter Telecaster control cavities.\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eDo you make custom harnesses?\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eI'm afraid I do not offer a custom harness service. Only kits developed, tested and listed on my website are the available kits. So no custom schematics etc. If you happen to be local to my office, then I do carry out custom work in house, but in regards to shipped out pre-wired harnesses I do not offer custom kits. I am however happy to use different pot values or cap values within reason if you have a specific requirement that differs to the specs listed above. If this is relevant to yourself then please get in touch to discuss further to ensure the request is possible. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cem\u003e\u003cstrong\u003eGPSR \u0026amp; Safety info\u003c\/strong\u003e\u003c\/em\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eManufacturer: \u003c\/b\u003eJames' Home of Tone, Laburnum Street, Stourbridge, DY8 4NX, UK.\u003cbr\u003eEmail: james@homeoftone.co.uk\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eEU Authorised Representative:\u003c\/b\u003e Global Trade Department (NI) Ltd, Office 834, Unit 6, 100 Lisburn Road, Belfast, BT9 6AG, Northern Ireland. Email: \u003ca href=\"mailto:contact@globaltradedept.com\" target=\"_blank\"\u003econtact@globaltradedept.com\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"James' Home of Tone","offers":[{"title":"Split shaft \/ Without \/ 0.022mfd","offer_id":57300203962750,"sku":"SIG-TELE-3WAY-SERIES-RH-001","price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Split shaft \/ Without \/ 0.05mfd","offer_id":57300204028286,"sku":"SIG-TELE-3WAY-SERIES-RH-003","price":69.99,"currency_code":"GBP","in_stock":true},{"title":"Split shaft \/ With \/ 0.022mfd","offer_id":57300203995518,"sku":"SIG-TELE-3WAY-SERIES-RH-002","price":71.49,"currency_code":"GBP","in_stock":true},{"title":"Split shaft \/ With \/ 0.05mfd","offer_id":57300204061054,"sku":"SIG-TELE-3WAY-SERIES-RH-004","price":71.49,"currency_code":"GBP","in_stock":true},{"title":"w\/Solid shaft conversion sleeve installed \/ Without \/ 0.022mfd","offer_id":57300217921918,"sku":"SIG-TELE-3WAY-SERIES-RH-005","price":70.59,"currency_code":"GBP","in_stock":true},{"title":"w\/Solid shaft conversion sleeve installed \/ Without \/ 0.05mfd","offer_id":57300217954686,"sku":"SIG-TELE-3WAY-SERIES-RH-006","price":70.59,"currency_code":"GBP","in_stock":true},{"title":"w\/Solid shaft conversion sleeve installed \/ With \/ 0.022mfd","offer_id":57300217987454,"sku":"SIG-TELE-3WAY-SERIES-RH-007","price":71.99,"currency_code":"GBP","in_stock":true},{"title":"w\/Solid shaft conversion sleeve installed \/ With \/ 0.05mfd","offer_id":57300218020222,"sku":"SIG-TELE-3WAY-SERIES-RH-008","price":71.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1117\/5838\/files\/Home_of_Tone_Signature_Series_3_way_series_mod_Telecaster_pre_wired_harness_loom_kit.png?v=1777453605","url":"https:\/\/www.homeoftone.co.uk\/products\/pre-wired-guitar-wiring-harness-3-way-push-pull-series-mod-telecaster-kit-right-handed","provider":"Home of Tone Ltd","version":"1.0","type":"link"}